Related papers: Simulating droplet adhesion on superhydrophobic su…
Adsorption of small amphiphilic molecules occurs in various biological and technological processes, sometimes desired, the other times unwanted (e.g., contamination). Surface-active molecules preferentially bind to interfaces and affect…
Direct Numerical Simulations of two superposed fluids in a channel with a textured surface on the lower wall have been carried out. A parametric study varying the viscosity ratio between the two fluids has been performed to mimic both {\bf…
Solutions of macromolecules can undergo liquid-liquid phase separation to form droplets with ultra-low surface tension. Droplets with such low surface tension wet and spread over common surfaces such as test tubes and microscope slides,…
Droplet wicking and evaporation in porous nanochannels is experimentally studied on a heated surface at temperatures ranging from 35oC to 90oC. The fabricated geometry consists of cross-connected nanochannels of height 728 nm with…
Droplets at the air-liquid interface of immiscible liquids usually form partially-submerged lens shapes (e.g. water on oil). In addition to this structure, we showed that droplets released from critical heights above the target liquid can…
Smoothed particle hydrodynamics (SPH) method has been increasingly used for simulating fluid flows, however its ability to simulate evaporating flow requires significant improvements. This paper proposes an SPH method for evaporating…
Ice accumulation hinders the performance of, and poses safety threats for infrastructure both on the ground and in the air. Previously, rationally designed superhydrophobic surfaces have demonstrated some potential as a passive means to…
We simulate the response of a particle-stabilized emulsion droplet in an external force field, such as gravity, acting equally on all $N$ particles. We show that the field strength required for breakup (at fixed initial area fraction)…
The atomisation of suspension containing liquid and dispersed particles is prevalent in many applications. Previous studies of droplet breakup mainly focused on homogeneous fluids, and the heterogeneous effect of particles on the breakup…
We experimentally investigated the splashing of dense suspension droplets impacting a solid surface, extending prior work to the regime where the viscosity of the suspending liquid becomes a significant parameter. The overall behavior can…
Superhydrophobic surfaces with multi-scale topographies offer exceptionally high apparent water contact angles and low contact angle hysteresis by virtue of the small liquid{\textendash}solid contact fractions they enable. Natural…
Droplet evaporation in turbulent sprays involves unsteady, multiscale and multiphase processes which make its comprehension and model capabilities still limited. The present work aims to investigate droplet vaporization dynamics within a…
Superhydrophobic surfaces, with liquid contact angle theta greater than 150 degree, have important practical applications ranging from self-cleaning window glasses, paints, and fabrics to low-friction surfaces. Many biological surfaces,…
When a free-falling liquid droplet is hit by a laser it experiences a strong ablation driven pressure pulse. Here we study the resulting droplet deformation in the regime where the ablation pressure duration is short, i.e. comparable to the…
A liquid drop spreading over a thin heterogeneous precursor film (such as an inhaled droplet on the mucus-lined wall of a lung airway) will experience perturbations in shape and location as its advancing contact line encounters regions of…
Because the superhydrophobic characteristic appears by forming a composite surface consisting of solid and air underneath the droplets, a large number of rough surfaces that can trap air have been fabricated. Recently, the air trapping on…
Impact of droplets of varying surface tension and subsequent spreading over a solid surface are inherent features in printing applications. In this regard, an experimental study of impact of two drops of varied surface tension is carried…
We investigate the problem of transport of a single fluid droplet through a non-wettable superhydrophobic porous medium. A mechanical soft body model is developed and used to simulate the process of pushing fluid droplets through pore space…
We investigated theoretically water evaporation from concentrated supramolecular mixtures, such as solutions of polymers or amphiphilic molecules, using numerical resolutions of a one dimensional model based on mass transport equations.…
Molecular dynamics simulations are used to study capillary adhesion from a nanometer scale liquid bridge between two parallel flat solid surfaces. The capillary force and the meniscus shape of the bridge are computed as the separation…