Related papers: InN nanowire solar cells on Si with amorphous Si i…
We report the influence of the AlN interlayer thickness (0-15 nm) on the photovoltaic properties of Al0.37In0.63N on Si heterojunction solar cells deposited by radio frequency sputtering. The poor junction band alignment and the presence of…
This study explores the impact of an optimized amorphous silicon (a-Si) buffer layer on AlxIn1-xN-on-Si(100) heterojunction solar cells, with Al content varying from 0% (InN) to 55%. The buffer layer improves the structural quality of the…
Aluminum Indium Nitride (AlInN) alloys offer great potential for photovoltaic devices thanks to their wide direct bandgap energy that covers the solar spectrum from 0.7 eV (InN) to 6.2 eV (AlN), and their superior resistance to high…
Radio-frequency (RF) sputtering is a low-cost technique for the deposition of large-area single-phase AlInN on silicon layers with application in photovoltaic devices. Here, the effect of the Al mole fraction x from 0 to 0.56 on the…
In Si nanowire (SiNW) solar cells enhanced light confinement property in addition to decoupling of charge carrier collection and light absorption directions plays a significant role to resolve the draw backs of bulk Si solar cells. In this…
This work studies the effect of four different types of buffer layers on the structural and optical properties of InGaN layers grown on Si(111) substrates and their correlation with electrical characteristics. The vertical electrical…
Compared to traditional pn-junction photovoltaics, hot carrier solar cells offer potentially higher efficiency by extracting work from the kinetic energy of photogenerated "hot carriers" before they cool to the lattice temperature. Hot…
Intermediate band solar cells hold the promise of ultrahigh power conversion efficiencies using a single semiconductor junction. Many current implementations use materials with bandgaps too small to achieve maximum efficiency or use…
We report on the fabrication and optimization of semi-transparent antimony sulfide (Sb$_2$S$_3$) thin-film solar cells in a superstrate configuration, using RF magnetron sputtering of metallic antimony followed by post-deposition…
We demonstrate a novel type of solar cell, one that uses fixed negative charges, formed at the interface of n-Si with Al2O3, to generate strong inversion at the Si surface by electrostatic repulsion. Built-in voltages of up to 755 mV are…
In recent years, aluminum nitride (AlN) has emerged as an attractive material for integrated photonics due to its low propagation losses, wide transparency window, and presence of both second- and third-order optical nonlinearities.…
The efficiency of GaAs nanowire solar cells can be significantly improved without any new processing steps or material requirements. We report coupled optoelectronic simulations of a GaAs nanowire (NW) solar cell with vertical p-i-n…
In-plane semiconductor nanowires with complex branched geometries, prepared via selective area growth (SAG), offer a versatile platform for advanced electronics, optoelectronics, and quantum devices. However, defects and disorder at the…
In this work is comprising of simulation results of amorphous Si (a-Si) solar cell, in which ITO was used as an anti-reflection coating (ARC). The thickness of ITO was optimized (65 nm) to achieve better performance for spectral region of…
The P+ {\alpha}-Si /N+ polycrystalline solar cell is molded using the AMPS-1D device simulator to explore the new high efficiency thin film poly-silicon solar cell. In order to analyze the characteristics of this device and the thickness of…
Nanowires have unique optical properties [1-4] and are considered as important building blocks for energy harvesting applications such as solar cells. [2, 5-8] However, due to their large surface-to-volume ratios, the recombination of…
Here, we compare the material quality of AlxIn1-xN layers deposited on Si with different crystallographic orientations, (100) and (111), via radio-frequency (RF) sputtering. To modulate their Al content, the Al RF power was varied from 0 to…
Achieving high crystalline quality Ge$_{1-x}$Sn$_{x}$ semiconductors at Sn content exceeding 10\% is quintessential to implementing the long sought-after silicon-compatible mid-infrared photonics. Herein, by using sub-20 nm Ge nanowires as…
Wide-gap Cu(In,Ga)S2 solar cells with In2O3:Sn (ITO) as transparent back contact are evaluated for the application as top cells in tandem devices. The effect of Na on the solar cell performance is investigated by supplying additional Na by…
Sulfide chalcopyrite, Cu(In,Ga)S2, having wide bandgap (larger than 1.5 eV), favorable optoelectronic properties, and high stability, is a promising top-cell absorber for tandem applications. Adapting device structures optimized for 1.0 -…