Related papers: Complementary and Asymmetric Tapered Bent Mid-Infr…
We report on the development of InP-based semiconductor amplifiers with a U-bend waveguide geometry having the input and output ports on one facet only. This waveguide geometry simplifies the chip alignment during the hybrid integration on…
We experimentally demonstrate a broadband, fabrication tolerant, CMOS compatible compact silicon waveguide taper (34.2 um) in silicon-on-insulator wire waveguides. The taper works on multi-mode interference along the length of the taper. A…
The miniaturization of pixel is essential for achieving high-resolution, planar, compact-size focal plane arrays (FPAs); however, the resulted increase in the optical crosstalk between adjacent pixels leads to serious drawback and…
Even though submicron silicon waveguides have been proposed for dense integration of photonic devices, to date the lightwave circuits on the market mainly rely on waveguides with micron-scale core dimensions. These larger waveguides feature…
We experimentally demonstrate a simple configuration for mid-infrared (MIR) frequency comb generation in quasi-phase-matched lithium niobate waveguides using the cascaded-$\chi^{(2)}$ nonlinearity. With nanojoule-scale pulses from an…
Mid-infrared (MIR) emitters are critical components in advanced photonic systems, driving progress in fields such as chemical sensing, environmental monitoring, medical diagnostics, thermal imaging and free-space communications.…
Mode-division-multiplexing (MDM) is attractive as a means to increase the link capacity of a single wavelength for optical interconnects via the use of multiple mode-channels in multimode bus waveguide.In order to route the data in MDM…
Dense waveguide arrays with half-wavelength-pitch, low-crosstalk, broadband, and flexible routing capability are essential for integrated photonics. However, achieving such performance is challenging due to the relatively weaker confinement…
Mid-infrared absorption spectroscopy is a well-established technique for non-destructive quantitative molecular analysis. Waveguide-integrated sensors provide a particularly compact solution operating with reduced sample volumes while…
Mid-infrared (MIR) spectroscopy is a powerful technique employed for a variety of applications, including gas sensing, industrial inspection, astronomy, surveillance, and imaging. Thin-film narrowband interference filters, targeted to…
We report a mid-infrared ring laser via fiber-to-waveguide hybrid integration enabled by directional couplers fabricated in fluoride glasses. Directional couplers were inscribed into fluoride glass using femtosecond laser direct writing,…
The multimode waveguide bends (MWBs) with very compact sizes are the key building blocks in the applications of different mode-division multiplexing (MDM) systems. To further increase the transmission capacity, the silicon multimode…
We experimentally demonstrate broadband waveguide crossing arrays showing ultra low loss down to $0.04\,$dB/crossing ($0.9\%$), matching theory, and crosstalk suppression over $35\,$dB, in a CMOS-compatible geometry. The principle of…
An ultracompact bi-sectional adiabatic tapered coupler, which is suitable for an adiabatic mode transformation between a common single mode SOI wire waveguide and a Si/III-V hybrid waveguide, are proposed for Si/III-V heterogeneous…
A novel design of large bandwidth, fabrication tolerant, CMOS-compatible compact tapers (15 um) have been proposed and experimentally demonstrated in silicon-on-insulator. The proposed taper along with linear grating couplers for spot-size…
Large imaging arrays of detectors at millimeter and submillimeter wavelengths have applications that include measurements of the faint polarization signal in the Cosmic Microwave Background (CMB), and submillimeter astrophysics. We are…
Terahertz communications is a promising modality for future short-range point-to point wireless data transmission at rates up to terabit per second. A milestone towards this goal is the development of an integrated transmitter and receiver…
While functional materials with both light transmitting and electromagnetic shielding are highly desirable, only very few of them meet the stringent electromagnetic interference (EMI) shielding criteria for optoelectronic systems. Here, a…
The mid-infrared (MIR) spectral range is of immense use for civilian and military applications. The large number of vibrational absorption bands in this range can be used for gas sensing, process control and spectroscopy. In addition, there…
MIDIR is the proposed thermal/mid-IR imager and spectrograph for the European Extremely Large Telescope (E-ELT). It will cover the wavelength range of 3 to at least 20 microns. Designed for diffraction-limited performance over the entire…