Related papers: Ultra-stable lasers using hollow-core fibre
State-of-the-art optical oscillators based on lasers frequency stabilized to high finesse optical cavities are limited by thermal noise that causes fluctuations of the cavity length. Thermal noise represents a fundamental limit to the…
Photonic integration offers the potential to bring complex high-performance optical systems to the form factor of a compact semiconductor chip. However, the range of system functions accessible critically depends on the extent to which…
We stabilize an ultraviolet diode laser system at 369.5 nm to the optical absorption signal from Yb+ ions in a hollow-cathode discharge lamp. The error signal for stabilization is obtained by Zeeman spectroscopy of the 3 GHz-wide absorption…
We describe the short-term frequency stability characterization of external-cavity diode lasers stabilized onto the 6S$_{1/2}$-7P$_{1/2}$ transition of Cs atom at 459 nm, using a microfabricated vapor cell. The laser beatnote between two…
We report the frequency stabilization of an erbium-doped fiber distributed-feedback laser using an all-fiber based Michelson interferometer of large arm imbalance. The interferometer uses a 1 km SMF-28 optical fiber spool and an acousto…
Ultra-low-noise stabilized lasers are a fundamental tool for precision quantum technologies, optical clocks, microwave and millimeter-wave generation, and fiber sensing. Existing systems rely on table-top bulk-optic components -- discrete…
Continuously and widely tunable lasers actively stabilized on a frequency reference are broadly employed in atomic, molecular and optical (AMO) physics. The frequency-stabilized optical frequency comb (OFC) provides a novel optical…
Demand for low-noise, continuous-wave, frequency-tunable lasers based on semiconductor integrated photonics has been advancing in support of numerous applications. In particular, an important goal is to achieve narrow spectral linewidth,…
The superb precision of an atomic clock is derived from its stability. Atomic clocks based on optical (rather than microwave) frequencies are attractive because of their potential for high stability, which scales with operational frequency.…
Providing phase stable laser light is important to extend the interrogation time of optical clocks towards many seconds and thus achieve small statistical uncertainties. We report a laser system providing more than 50 uW phase-stabilized UV…
We achieved a 0.5 Hz optical beat note line width with ~ 0.1 Hz/s frequency drift at 972 nm between two external cavity diode lasers independently stabilized to two vertically mounted Fabry-Perot (FP) reference cavities. Vertical FP…
While optical fibers display excellent performances in the infrared, visible and ultraviolet ranges remain poorly addressed by them. Obtaining better fibers for the short-wavelength range has been restricted, in all fiber optics, by…
We consider various approaches to the creation of a high-stability active optical frequency standard, where the atomic ensemble itself produces a highly stable and accurate frequency signal. The short-time frequency stability of such…
We describe a frequency stabilized diode laser at 698 nm used for high resolution spectroscopy of the 1S0-3P0 strontium clock transition. For the laser stabilization we use state-of-the-art symmetrically suspended optical cavities optimized…
We report an optical link of 540 km for ultrastable frequency distribution over the Internet fiber network. The stable frequency optical signal is processed enabling uninterrupted propagation on both directions. The robustness and the…
The interrogation of an ultra-narrow clock transition of a single trapped ion for optical frequency metrology requires a laser stabilized to a couple of Hz per second with a linewidth of the same order of magnitude. Today, lasers in the…
We present a laser system based on a 48 cm long optical glass resonator. The large size requires a sophisticated thermal control and optimized mounting design. A self balancing mounting was essential to reliably reach sensitivities to…
We demonstrate a powerful tool for high-resolution mid-IR spectroscopy and frequency metrology with quantum cascade lasers (QCLs). We have implemented frequency stabilization of a QCL to an ultra-low expansion (ULE) reference cavity, via…
Precision applications including quantum computing and sensing, mmWave/RF generation, and metrology, demand widely tunable, ultra-low phase noise lasers. Today, these experiments employ table-scale systems with bulk-optics and isolators to…
Anti-resonant hollow-core fibers (AR-HCFs) have emerged as an important medium for high-power laser delivery due to their low optical nonlinearity and high damage threshold. However, current delivery systems of high-power laser based on…