Related papers: Spatiotemporal Calibration of Doppler Velocity Log…
Underwater environments pose significant challenges for visual Simultaneous Localization and Mapping (SLAM) systems due to limited visibility, inadequate illumination, and sporadic loss of structural features in images. Addressing these…
Precise autonomous navigation remains a substantial challenge to all underwater platforms. Inertial Measurement Units (IMU) and Doppler Velocity Logs (DVL) have complementary characteristics and are promising sensors that could enable fully…
Autonomous underwater vehicles (AUVs) are used in a wide range of underwater applications, ranging from seafloor mapping to industrial operations. While underwater, the AUV navigation solution commonly relies on the fusion between inertial…
Autonomous underwater vehicles (AUVs) are sophisticated robotic platforms crucial for a wide range of applications. The accuracy of AUV navigation systems is critical to their success. Inertial sensors and Doppler velocity logs (DVL) fusion…
Visual degradation caused by limited visibility, insufficient lighting, and feature scarcity in underwater environments presents significant challenges to visual-inertial simultaneous localization and mapping (SLAM) systems. To address…
Correcting gradual position drift is a challenge in long-term subsea navigation. Though highly accurate, modern inertial navigation system (INS) estimates will drift over time due to the accumulated effects of sensor noise and biases, even…
Simultaneous localization and mapping (SLAM) is a critical capability for autonomous systems. Traditional SLAM approaches, which often rely on visual or LiDAR sensors, face significant challenges in adverse conditions such as low light or…
6-Degree of Freedom (6DoF) motion estimation with a combination of visual and inertial sensors is a growing area with numerous real-world applications. However, precise calibration of the time offset between these two sensor types is a…
Accurate spatiotemporal calibration is a prerequisite for multisensor fusion. However, sensors are typically asynchronous, and there is no overlap between the fields of view of cameras and LiDARs, posing challenges for intrinsic and…
Autonomous underwater vehicles (AUVs) are increasingly used in many applications such as oceanographic surveys, mapping, and inspection of underwater structures. To successfully complete those tasks, a Doppler velocity log (DVL) and an…
Autonomous underwater vehicles (AUVs) are underwater robotic platforms used in a variety of applications. An AUV's navigation solution relies heavily on the fusion of inertial sensors and Doppler velocity logs (DVL), where the latter…
Robotic underwater systems, e.g., Autonomous Underwater Vehicles (AUVs) and Remotely Operated Vehicles (ROVs), are promising tools for collecting biogeochemical data at the ice-water interface for scientific advancements. However, state…
The integrated inertial system, typically integrating an IMU and an exteroceptive sensor such as radar, LiDAR, and camera, has been widely accepted and applied in modern robotic applications for ego-motion estimation, motion control, or…
Multi-robot simultaneous localization and mapping (SLAM) is a fundamental task in multi-robot operations. Robots must have a common understanding of their location and that of their team members to complete coordinated actions. However,…
Accurate and reliable sensor calibration is essential to fuse LiDAR and inertial measurements, which are usually available in robotic applications. In this paper, we propose a novel LiDAR-IMU calibration method within the continuous-time…
Self-driving vehicles (SDVs) require accurate calibration of LiDARs and cameras to fuse sensor data accurately for autonomy. Traditional calibration methods typically leverage fiducials captured in a controlled and structured scene and…
Existing underwater SLAM systems are difficult to work effectively in texture-sparse and geometrically degraded underwater environments, resulting in intermittent tracking and sparse mapping. Therefore, we present Water-DSLAM, a novel…
The accurate navigation of autonomous underwater vehicles critically depends on the precision of Doppler velocity log (DVL) velocity measurements. Recent advancements in deep learning have demonstrated significant potential in improving DVL…
In this paper, we propose a tightly-coupled, multi-modal simultaneous localization and mapping (SLAM) framework, integrating an extensive set of sensors: IMU, cameras, multiple lidars, and Ultra-wideband (UWB) range measurements, hence…
Sensor calibration, which can be intrinsic or extrinsic, is an essential step to achieve the measurement accuracy required for modern perception and navigation systems deployed on autonomous robots. To date, intrinsic calibration models for…