Related papers: Testing the DAE LLRF system with a PIP-II SSR2 Cav…
Louisiana State University Center for Advanced Microstructures and Devices (CAMD) began a control system upgrade project in early 1997. At the time, the storage ring was controlled by a VAX/VMS system, primarily using CAMAC for I/O. The…
Traveling wave SRF cavity is a new technology and requires a multi-stage process for development. Conceptual designs have been proposed to adopt TW resonance in an SRF cavity The early stages of developments have been funded by several SBIR…
We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for…
In laser illuminated dielectric accelerators (DLA) high acceleration gradients can be achieved due to high damage thresholds of the materials at optical frequencies. This is a necessity for developing more compact particle accelerator…
The Fermilab Side-Coupled Linac accelerates H-beam from 116 MeV to 400 MeV through seven 805 MHz modules. Twelve wire scanners are present in the Side Coupled Linac and four are present in the transfer line between the Linac and the Booster…
We simulate the performance of a gravitational wave interferometer in the Dual Recycling (DR) configuration, as will be used for systems like Advanced-LIGO. Our grid-based simulation program models complex interferometric detectors with…
Low Level RF (LLRF) control systems of linear accelerators (LINACs) are typically implemented with heterodyne based architectures, which have complex analog RF mixers for up and down conversion. The Gen 3 Radio Frequency System-on-Chip…
A new experimental platform was constructed at the Second Radioactive Ion Beam Line in Lanzhou (RIBLL2) of HIRFL-CSR accelerator facility at Lanzhou, China. Its performance, along with several newly developed detectors, was tested in two…
In the framework of the upgrade of the SPARC_LAB facility at INFN-LNF, named EuPRAXIA@SPARC_LAB, a high gradient linac is foreseen. One of the most suitable options is to realize it in X-band. A preliminary design study of both accelerating…
Laser frequency noise suppression is a critical requirement for the Laser Interferometer Space Antenna (LISA) mission to detect gravitational waves. The baseline laser stabilization is achieved using cavity pre-stabilization and a…
The beam diagnostics system for the Double ElectroStatic Ion Ring ExpEriment (DESIREE) project under construction is briefly described. A system which can operate over a wide range of beam intensities and energies for the DESIREE has been…
Considering that frequency diverse array multiple-input multiple-output (FDA-MIMO) possesses extra range information to enhance sensing performance, this paper explores the FDA-MIMO-based integrated sensing and communication (ISAC) system.…
Project-X is the proposed high intensity proton facility to be built at Fermilab, US. First stage of the Project-X consists of superconducting linac which will be operated in continuous wave (CW) mode to accelerate the beam from 2.5 MeV to…
The design of a 637-nm wavelength, photonic-integrated-circuit-based external cavity laser (PIC-based ECL) aimed at quantum technology applications is presented together with first experimental results. The PIC is designed to provide…
The INO ICAL (India-based Neutrino Observatory Iron Calorimeter) experiment is an upcoming mega-science project currently in the developmental stages. This initiative employs over 28,800 Resistive Plate Chambers (RPC) based charged particle…
The JAERI/KEK Joint Project for the high-intensity proton accelerator facility has been proposed with a superconducting (SC) linac option from 400 MeV to 600MeV. System design of the SC linac has been carried out based on the…
During 1999, four 700-MHz, medium-beta (b = 0.64), superconducting radio frequency (SCRF) cavities for a high-intensity proton linac project at Los Alamos National Laboratory (LANL) were manufactured by industry. The SCRF cavities were…
A LLRF control and data acquisition system for the 8-cavity cryomodule1 at the ILCTA has been implemented using three 33-channel ADC boards in a VXI mainframe. One card each is dedicated to the cavity probes for vector control, forward…
The cavities in superconducting linacs tend to operate with narrow bandwidths that are comparable to microphonic induced detuning from external forces. Proportional-Integral (PI) feedback loops are used to stabilize the cavity voltage in…
One unique feature of nonlinear dynamical systems is the existence of superharmonic and subharmonic resonances in addition to primary resonances. In this study, an effective vibration testing methodology is introduced for the experimental…