Related papers: Long wave infrared detection using probabilistic s…
We demonstrate a suspended thin-film aluminum nitride (AlN) microbolometer for narrowband very long-wave infrared detection. The device uses a 100-nm-thick AlN membrane suspended above a Pt back reflector by a 1-um air gap. Resonant…
The Advanced ACTPol upgrade on the Atacama Cosmology Telescope aims to improve the measurement of the cosmic microwave background anisotropies and polarization, using four new dichroic detector arrays fabricated on 150-mm silicon wafers.…
A new radiation sensor derived from plasma panel display technology is introduced. It has the capability to detect ionizing and non-ionizing radiation over a wide energy range and the potential for use in many applications. The principle of…
The analog hadron calorimeter for the International Linear Collider (ILC) of the CALICE collaboration utilized novel silicon detectors, the Sillicon Photomultipliers (SiPMs), for the detection of scintillation light coming from very small…
The advances in Charge Coupled Devices in one hand and the high resolution measurements of holographic technique on the other hand, we have adopted the method of digital real-time holographic interferometry for the diagnostics of high…
Conventional spectrometers are limited by trade-offs set by size, cost, signal-to-noise ratio (SNR), and spectral resolution. Here, we demonstrate a deep learning-based spectral reconstruction framework, using a compact and low-cost on-chip…
Mid-infrared (IR) array detectors have been used for astronomical observations in space. However, the uniformities of their spectral response curves have not been investigated in detail, the understanding of which is important for…
Graphene is a valuable 2D platform for plasmonics as illustrated in recent THz and mid-infrared optics experiments. These high-energy plasmons however, couple to the dielectric surface modes giving rise to hybrid plasmon-polariton…
Indoor tracking has all-pervasive applications beyond mere surveillance, for example in education, health monitoring, marketing, energy management and so on. Image and video based tracking systems are intrusive. Thermal array sensors on the…
We present a proof of concept for a spectrally selective near-infrared (NIR) and short-wavelength infrared (SWIR) photodetector based on nanopatterned multilayer graphene intercalated with FeCl$_3$ (NPMLG-FeCl$_3$), enabling large…
We demonstrate metamaterial metal-based bolometers, which take advantage of resonant absorption in that a spectral and/or polarization filter can be built into the bolometer. Our proof-of-principle gold-nanostructure-based devices operate…
Our growing ability to tailor healthcare to the needs of individuals has the potential to transform clinical treatment. However, the measurement of multiple biomarkers to inform clinical decisions requires rapid, effective, and affordable…
Arrays of photodetector-based pixel sensors are ubiquitous in modern devices, such as smart phone cameras, automobiles, drones, laptops etc. Two dimensional (2D) material-based photodetector arrays are a relevant candidate, especially for…
Strip and pixels sensors, fabricated on high resistivity silicon substrate, normally of p-type, are used in detectors for High Energy Physics (HEP) typically in a hybrid detector assembly. Furthermore, and owing to their inherent advantages…
Infrared spectroscopy, especially for molecular vibrations in the fingerprint region between 600 and 1500 cm-1, is a powerful characterization method for bulk materials. However, molecular fingerprinting at the nanoscale level still remains…
We propose a new scintillation-type detector in which high-energy radiation produces electron-hole pairs in a direct-gap semiconductor material that subsequently recombine producing infrared light to be registered by a photo-detector. The…
Mid-infrared photodetectors are susceptible to background noise since every object in the surroundings emits thermal radiation from different directions. To reduce this background noise and enhance signal-to-noise ratio of mid-infrared…
Fast, room temperature imaging at THz and sub-THz frequencies is an interesting feature which could unleash the full potential of plenty applications in security, healthcare and industrial production. In this Letter we introduce…
Context. The spatially coherent multipath propagation of pulsar radiation leads to a temporal and spectral interference patterns called scintillation. It is caused by density variations in the ionized interstellar medium, which often take…
Plasmons, collective excitations of electrons in solids, are associated with strongly confined electromagnetic fields, with wavelengths far below the wavelength of photons in free space. This strong confinement promises the realization of…