Related papers: Method for backtracking the layer thermal conducti…
Short review on the different models for the electro-thermal 3-omega method. We present the deduction of the fundamental relation between the 3-omega voltage with the temperature rise to determine the thermal conductivity. The usage of the…
The accurate determination of thermal conductivity $\kappa(T)$ in bulk materials at room temperature and above is crucial for evaluating their compatibility for specific applications. The 3$\omega$ technique is an established methodology…
In this article, we are proposing a thorough analysis of the cross, and the in-plane thermal conductivity of thin-film materials based on the 3$\omega$ method. The analysis accommodates a 2D mathematical heat transfer model of a…
Thin film YIG (Y$_3$Fe$_5$O$_{12}$) is a prototypical material for experiments on thermally generated pure spin currents and the spin Seebeck effect. The 3-omega method is an established technique to measure the cross-plane thermal…
The 3$\omega$ method is a dynamic measurement technique developed for determining the thermal conductivity of thin films or semi-infinite bulk materials. A simplified model is often applied to deduce the thermal conductivity from the slope…
The reduction of the thermal conductivity in nanostructures opens up the possibility of exploiting for thermoelectric purposes also materials such as silicon, which are cheap, available and sustainable but with a high thermal conductivity…
Organic thin film materials with molecular ordering are gaining attention as they exhibit semiconductor characteristics. When using them for electronics, the thermal management becomes important, where heat dissipation is directional owning…
Thermal conductivity and interfacial thermal conductance play crucial roles in the design of engineering systems where temperature and thermal stress are of concerns. To date, a variety of measurement techniques are available for both bulk…
We developed a novel contactless frequency-domain approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a similar line-shaped heater geometry as…
We have designed and developed a new experimental setup, based on the 3-omega method, to measure thermal conductivity, heat capacity and electrical resistivity of a variety of samples in a broad temperature range (2-550 K) and under…
Thermal conductivities $\Lambda $ of amorphous carbon thin films are measured in the temperatures range 80--400 K using the $3\omega $ method. Sample films range from soft a-C:H prepared by remote-plasma deposition ($\Lambda = 0.20$ W…
Solid heterostructures composed of substrates and epitaxial films are extensively used in advanced technologies, and their thermophysical properties fundamentally determine the performance, efficiency, reliability, and lifetime of the…
Thermoreflectance methods by picosecond pulse heating and by nanosecond pulse heating have been developed under the same geometrical configuration as the laser flash method by the National Metrology Institute of JAPAN, AIST. Using these…
Anisotropic thermal transport plays a key role in both theoretical study and engineering practice of heat transfer, but accurately measuring anisotropic thermal conductivity remains a significant challenge. To address this issue, we propose…
The three-omega method, a powerful technique to measure the thermal conductivity of nanometer-thick films and the interfaces between them, has historically employed straight conductive wires to act as both heaters and thermometers. When…
This study presents a comprehensive methodology for determining the thermal conductivity (TC) of materials with high reliability. The methodology addresses issues such as surface topographical variations and substrate interference by…
A novel microfabricated, all-electrical measurement platform is presented for a direct, accurate and rapid determination of the thermal conductivity and diffusivity of liquid and solid materials. The measurement approach is based on the…
Toward measuring the thermal properties of exfoliated atomically thin materials, we demonstrate simultaneous measurements of the thermal conductivity and specific heat in suspended membranes. We use the 3{\omega} technique applied to…
We report a method to obtain insights into lower thermal conductivity of \beta-Ga2O3 thin films grown by molecular beam epitaxy (MBE) on c-plane sapphire and 4H-SiC substrates. We compare experimental values against the numerical…
In this paper we study the thermal effective behaviour for 3D multiphase composite material consisting of three isotropic phases which are the matrix, the inclusions and the coating media. For this purpose we use an accelerated FFT-based…