Related papers: Solvatochromic microcavity ion sensors
An interleaved, chirped electro-optic dual comb system is demonstrated for rapid, high dynamic range measurements of cavity optomechanical sensors. This approach allows for the cavity displacements to be interrogated at measurement times as…
This paper introduces an innovative two-core fiber (TCF) optic sensor employing a Mach-Zehnder interferometer (MZI) to monitor the optogenetic response of light-sensitive human dental pulp stem cells (hDPSCs). The in-fiber MZI, formed using…
In this study, novel flexible micro-scale humidity sensors were directly fabricated in graphene oxide (GO) and polyimide (PI) using ion beam writing without any further modifications, and then successfully tested in an atmospheric chamber.…
The humidity sensitivity of n-type strontium-hexaferrite semiconductors, X-type (Sr2Co2Fe28O46) and Z-type (Sr3Co2Fe24O41), are investigated at room temperature. The contact and reactions between water and material surface are demonstrated…
Superionic conductors, or solid-state ion-conductors surpassing 0.01 S/cm in conductivity, can enable more energy dense batteries, robust artificial ion pumps, and optimized fuel cells. However, tailoring superionic conductors require…
We present a tunable metal ion beam that delivers controllable ion currents in the picoamp range for testing of dry-phase ion sensors. Ion beams are formed by sequential atomic evaporation and single or multiple electron impact ionization,…
A preconcentrating surface-enhanced Raman scattering (SERS) sensor for the analysis of liquid-soaked tissue, tiny liquid droplets and thin liquid films without the necessity to collect the analyte is reported. The SERS sensor is based on a…
We demonstrate a quantitative broadband fiber sensor, based on evanescent field sensing in the cladding holes of an air-suspended solid-core photonic crystal fiber. We discuss the fabrication process, together with the structural- and…
A hydro code coupled with radiation transfer was applied to produce monochromatic light curves of two models of type II supernovae (SN II) simulating SN II-P and SN IIb (SN 1993J-like). We then used these template light curves to evaluate…
Hydrogen (H2) is a well-known reduction gas and for safety reasons is very important to be detected. The most common systems employed along its detection are metal oxide-based elements. However, the latter demand complex and expensive…
Few-layer molybdenum disulfide (FL-MoS$_2$) films have been integrated into amorphous silicon (a-Si:H) pin photodetectors. To achieve this, vertical a-Si:H photodiodes were grown by plasma-enhanced chemical vapor deposition (PE-CVD) on top…
In view of the implementation of beam-monitoring sensors for CERN's Large Hadron Collider (LHC), and also in order to validate Thermoluminescence Detectors as a versatile tool to measure ionizing radiation doses in mixed fields at hadron…
Dual-comb spectroscopy allows for the rapid, multiplexed acquisition of high-resolution spectra without the need for moving parts or low-resolution dispersive optics. This method of broadband spectroscopy is most often accomplished via…
The detection of quantal exocytic events from neurons and neuroendocrine cells is a challenging task in neuroscience. One of the most promising platforms for the development of a new generation of biosensors is diamond, due to its…
Quantum sensors based on nitrogen-vacancy centers in diamond have emerged as a promising detection modality for nuclear magnetic resonance (NMR) spectroscopy owing to their micron-scale detection volume and non-inductive based detection. A…
Given the many and varied roles of ions in living organisms, biocompatible organic ion sensors are a matter of considerable interest. In this work, simple, low-voltage, solid-state hygroscopic insulator field effect transistors (HIFETs)…
Alkali metal ions such as sodium and potassium cations play fundamental roles in biology. Developing highly sensitive and selective methods to both detect and quantify these ions is of considerable importance for medical diagnostics and…
We propose a new sensing method based on the measurement of the second-order autocorrelation of the output of micro- and nanolasers with intensity feedback. The sensing function is implemented through the feedback-induced threshold shift,…
Optical systems capable of generating fields with sub-wavelength spatial features have become standard in science and engineering research and industry. Pertinent examples include atom- and ion-based quantum computers and optical…
In this work, we have investigated the possibility of using COOH functionalized CdTe quantum dots (QDs) as fluorescent nanosensor for the detection of some environmentally hazardous metal ions ($\rm{Cr^{3+}}$, $\rm{Pb^{2+}}$,…