Related papers: Microfabricated multi-axis cell for integrated ato…
Grating magneto-optical traps are an enabling quantum technology for portable metrological devices with ultracold atoms. However, beam diffraction efficiency and angle are affected by wavelength, creating a single-optic design challenge for…
We propose a novel approach to the important fundamental problem of detecting weak optical fields at the few photon level. The ability to detect with high efficiency (>99%), and to distinguish the number of photons in a given time interval…
With the rapid development of information and communication technologies in recent years, the transmission capacity of single-core optical fibers has nearly reached its physical limit. Space-division multiplexing based on multi-core fibers…
We have achieved stimulated laser cooling of thermal rubidium atomic beams on a silicon chip. Following pre-collimation via a silicon microchannel array, we perform beam brightening via a blue-detuned optical molasses. Owing to the small…
We investigate a setup where a cloud of atoms is trapped in an optical lattice potential of a standing wave laser field which is created by retro-reflection on a micro-membrane. The membrane vibrations itself realize a quantum mechanical…
Orbital angular momentum (OAM) modes have emerged as a promising solution for enhancing the capacity of optical multiplexing systems, leveraging their theoretically unbounded set of orthogonal spatial modes. However, the generation and…
Satellite-based quantum technologies represent a possible route for extending the achievable range of quantum communication, allowing the construction of worldwide quantum networks without quantum repeaters. In space missions, however, the…
Epitaxial growth of atomically-sharp interfaces serves as one of the main building blocks of nanofabrication. Such interfaces are crucial for the operation of various devices including transistors, photo-voltaic cells, and memory…
Compact varifocal lenses are essential to various imaging and vision technologies. However, existing varifocal elements typically rely on mechanically-actuated systems with limited tuning speeds and scalability. Here, an ultrathin…
Mass production of photonic integrated circuits requires high-throughput wafer-level testing. We demonstrate that optical probes equipped with 3D-printed elements allow for efficient coupling of light to etched facets of nanophotonic…
The maturity of the chemical vapor deposition graphene-based device processing has increased from chip level demonstrations to wafer-scale fabrication in the past few years. Due to this wafer-scale, electrical characterization and analysis…
Metalenses, which exhibit superior light-modulating performance with sub-micrometer-scale thicknesses, are suitable alternatives to conventional bulky refractive lenses. However, fabrication limitations, such as a high cost, low throughput,…
Milli-Kelvin atomic force microscopy (mK-AFM) presents an ongoing experimental challenge due to the intense vibrations in a cryogen-free dilution refrigerator and the low cooling power available at mK temperatures. A viable approach is to…
Portable and cost-effective gas sensors are gaining demand for a number of environmental, biomedical and industrial applications, yet current devices are confined into specialized labs and cannot be extended to general use. Here, we…
Qualification of high-performance metal components produced by laser powder bed fusion (LPBF) must identify process-induced porous defects that reduce ductility and nucleate fatigue cracking. Detecting such defects via optical monitoring of…
We have combined direct nanofabrication by local anodic oxidation with conventional electron-beam lithography to produce a parallel double quantum dot based on a GaAs/AlGaAs heterostructure. The combination of both nanolithography methods…
A high sensitivity force sensor based on dielectric microspheres in vacuum, optically trapped by a single, upward-propagating laser beam, is described. Off-axis parabolic mirrors are used both to focus the 1064~nm trapping beam and to…
Microfluidic fuel cells (MFCs) are microfluidic electrochemical conversion devices that are used to power small pieces of electrical equipment. Their performance relies on the improvement of the mass transfer of the reactants at the…
Magnetic field source localization and imaging happen at different scales. The sensing baseline ranges from meter scale such as magnetic anomaly detection, centimeter scale such as brain field imaging to nanometer scale such as the imaging…
The need for rapid fabrication of microfluidic devices has become increasingly critical as microfluidics become part of biomedical sensors. Using Warp and Weft Wiring (WWW) of copper wires, this paper presents a novel low-cost method for…