Related papers: Development and Potential of new Micro-Mirror Devi…
For microlensing case angular distances between images or typical astrometric shifts due to microlensing are about $10^{-5}-10^{-6} \mu as$. Such an angular resolution will be reached with the space space--ground interferometer Radioastron.…
New challenges in submillimeter wave astronomy require instruments with a combination of high sensitivity and angular resolution, wide field of view and multiwave (multicolor) spectral range. New large single mm/submm telescopes are in high…
Micro scanning mirrors (MSM) extend the range and field of view of LiDARs, medical imaging devices, and laser projectors. However, a new class of soft-hinged MSMs contains out-of-plane translation in addition to the 2 degree-of-freedom…
A major goal of modern astrophysics is to understand the processes by which the universe evolved from its initial simplicity, as seen in measurements of the Cosmic Microwave Background, to the universe we see today, with complexity on all…
The 24 micron array on board the Spitzer Space Telescope is one of three arrays in the Multi-band Imaging Photometer for Spitzer (MIPS) instrument. It provides 5.3 x 5.3 arcmin images at a scale of ~2.5 arcsec per pixel corresponding to…
Fundamentally new technology is described for constructing low areal mass density (1kg/m^2), high precision (< 10micron RMS) reflectors scalable to large apertures (10 to 20 meters) for use as the primary element of a telescope system. A…
A digital micromirror device (DMD) is an amplitude-type spatial light modulator. However, a complex-amplitude light modulation with a DMD can be achieved using the superpixel scheme. In the superpixel scheme, we notice that multiple…
The surface of a spinning liquid takes the shape of a paraboloid that can be used as a reflecting mirror. This very old and nearly forgotten concept has recently been revived and I review its present status. Extensive interferometric tests…
Dielectric metasurfaces are two-dimensional structures composed of nano-scatterers that manipulate phase and polarization of optical waves with subwavelength spatial resolution, enabling ultra-thin components for free-space optics. While…
The results of a study of the accuracy characteristics and image quality on the SAO RAS optical telescopes, Zeiss-1000 and BTA, using the recently developed "Telescope Analyzer" device are described: a method for determining the…
Submillimeter cameras now have up to $10^4$ pixels (SCUBA 2). The proposed CCAT 25-meter submillimeter telescope will feature a 1 degree field-of-view. Populating the focal plane at 350 microns would require more than $10^6$ photon-noise…
The Diffuse Microwave Emission Survey (DIMES) has been selected for a mission concept study for NASA's New Mission Concepts for Astrophysics program. DIMES will measure the frequency spectrum of the cosmic microwave background and diffuse…
We propose a novel x-ray imaging system, Multi-Image X-ray Interferometer Module (MIXIM), with which a very high angular resolution can be achieved even with a small system size. MIXIM is composed of equally-spaced multiple slits and an…
The Submillimetron is the international project of the space telescope for astronomical studies at the submillimeter and infrared wavelengths using facilities of the Russian segment of the International Space Station (ISS). The concept of…
MIRI, the Mid-InfraRed Instrument, is one of four instruments being built for the James Webb Space Telescope. It is being developed jointly between an European Consortium (21 institutes from 10 countries, under the auspices of ESA), and the…
Global MCAO aims to exploit a very wide technical field of view to find AO-suitable NGSs, with the goal to increase the overall sky coverage. The concept foresees the use of numerical entities, called Virtual Deformable Mirrors, to deal…
We present a superpixel method for full spatial phase and amplitude control of a light beam using a digital micromirror device (DMD) combined with a spatial filter. We combine square regions of nearby micromirrors into superpixels by low…
Optical components, such as lenses, have traditionally been made in the bulk form by shaping glass or other transparent materials. Recent advances in metasurfaces provide a new basis for recasting optical components into thin, planar…
We report on our ongoing efforts to ensure that the MICADO NIR imager reaches differential absolute (often abbreviated: relative) astrometric performance limited by the SNR of typical observations. The exceptional 39m diameter collecting…
Despite the large budgets spent annually on astronomical research equipment such as telescopes, instruments and supercomputers, the general trend is to analyse and view the resulting datasets using small, two-dimensional displays. We report…