Related papers: Stable crack propagation in dislocation-engineered…
Plasticity in hexagonal close packed (HCP) metals and alloys such as Titanium (Ti) and Zirconium (Zr) is carried out by the motion of $\langle a \rangle$ dislocations. Above room temperature, in situ transmission electron microscopy…
Crack growth in stress corrosion cracking (SCC) in 7xxx Al alloys is an intermittent process, which generates successive crack arrest markings (CAMs) visible on the fracture surface. It is conjectured that H is generated at the crack tip…
Crack initiation and propagation under high-cycle fatigue conditions have been investigated for a polycrystalline Ni-based superalloy by in-situ synchrotron assisted diffraction and phase contrast tomography. The cracks nucleated along the…
Creep in single crystal Nickel-based superalloys has been a topic of interest since decades, and nowadays simulations are more and more able to complement experiments. In these alloys, the $\gamma/\gamma'$ phase microstructure co-evolves…
Equations for dislocation evolution bridge the gap between dislocation properties and continuum descriptions of plastic behavior of crystalline materials. Computer simulations can help us verify these evolution equations and find their…
This study addresses ductile fracture of single grains in metals by modeling of the formation and propagation of transgranular cracks. A proposed model integrates gradient extended hardening, phase-field modeling for fracture, and crystal…
The analogy between frictional cracks, propagating along interfaces in frictional contact, and ordinary cracks in bulk materials is important in various fields. We consider a stress-controlled frictional crack propagating at a velocity…
We have studied the propagation of a crack front along the heterogeneous weak plane of a transparent poly(methyl methacrylate) (PMMA) block using two different loading conditions: imposed constant velocity and creep relaxation. We have…
We investigate experimentally and theoretically the dynamics of a crack front during the micro-instabilities taking place in heterogeneous materials between two successive equilibrium positions. We focus specifically on the spatio-temporal…
The fracture toughness of Al/SiC nanolaminates with different layer thicknesses (in the range 10 to 100 nm) was measured by means of micropillar splitting and bending of a notched beam. The crack plane was perpendicular to the layers in the…
Plastic flow in body-centered cubic (BCC) metals and dilute/concentrated alloys is governed by the motion of <111> screw dislocations, whose glide is often impeded by cross-kinks (jogs). While existing strengthening models typically treat…
The paper addresses the problem of a Mode III interfacial crack advancing quasi-statically in a heterogeneous composite material, that is a two-phase material containing elastic inclusions, both soft and stiff, and defects, such as…
When a thin film moderately adherent to a substrate is subjected to residual stress, the cooperation between fracture and delamination leads to unusual fracture patterns, such as spirals, alleys of crescents and various types of strips, all…
To understand how dislocations form ordered structures during the deformation of metals, we perform computer simulation studies of the dynamics and patterning of screw dislocations in two dimensions. The simulation is carried out using an…
The stress-driven motion of dislocations in crystalline solids, and thus the ensuing plastic deformation process, is greatly influenced by the presence or absence of various point-like defects such as precipitates or solute atoms. These…
While of paramount importance in material science, the dynamics of cracks still lacks a complete physical explanation. The transition from their slow creep behavior to a fast propagation regime is a notable key, as it leads to full material…
We report results of large-scale molecular-dynamics (MD) simulations of dynamic deformation under biaxial tensile strain of pre-strained single-crystalline nanometer-scale-thick face-centered cubic (fcc) copper films. Our results show that…
We investigate crack propagation in a simple two-dimensional visco-elastic model and find a scaling regime in the relation between the propagation velocity and energy release rate or fracture energy, together with lower and upper bounds of…
We discuss crack propagation along the interface between two dissimilar materials. The crack edge separates two states of the interface, ``stick'' and ``slip''. In the slip region we assume that the shear stress is proportional to the…
This work presents a finite element method for simulating dynamic processes that involve the coupled evolution of dislocation motion and crack propagation. The method numerically solves the Concurrent Atomistic-Continuum (CAC) formulation…