Related papers: Unveiling the Puzzle of Brittleness in Single Crys…
Body-centred cubic (BCC) transition metals tend to be brittle at low temperatures, posing significant challenges in processing and major concerns for damage tolerance. The brittleness is largely dictated by the screw dislocation core; the…
Plasticity in body-centred cubic (BCC) metals, including dislocation interactions at grain boundaries, is much less understood than in face-centred cubic (FCC) metals. At low temperatures additional resistance to dislocation motion due to…
A discrete model describing defects in crystal lattices and having the standard linear anisotropic elasticity as its continuum limit is proposed. The main ingredients entering the model are the elastic stiffness constants of the material…
Mg represents a group of technically important hexagonal-close packed (hcp) metals whose mechanical behaviors are very different from body-centered cubic (bcc) and face-centered cubic (fcc) metals and the underlying mechanisms remain…
Fracture material is seriously problem in daily life, and it has connection with mechanical properties itself. The mechanical properties is belief depend on dislocation movement and crack propagation in the crystal. Information about this…
Nanoindentation, a common technique for probing the mechanical properties of crystalline materials, exhibits both surface and bulk-dominated responses that are linked to the parent crystal's elasticity and plasticity. For FCC crystals, the…
It is well known that diamond does not deform plastically at room temperature and usually fails in catastrophic brittle fracture. Here we demonstrate room-temperature dislocation plasticity in sub-micrometer sized diamond pillars by in-situ…
Most of crystalline materials develop an hysteresis on their deformation curve when a mechanical loading is applied in alternating directions. This effect, also known as the Bauschinger effect, is intimately related to the reversibile part…
Most monolithic brittle materials are vulnerable to the failure by cracks because of a lack of intrinsic toughening mechanisms, such as the plasticity in the vicinity of the crack front. As a result, most of the efforts to mitigate the…
Cracks, the major vehicle for material failure, tend to accelerate to high velocities in brittle materials. In three-dimensions, cracks generically undergo a micro-branching instability at about 40% of their sonic limiting velocity. Recent…
We clarify via molecular dynamic simulations and theoretical analysis the origin of dislocation creation and void nucleation during uniaxial tensile process in face-centered-cubic (FCC) ductile metals. We show that the dislocations are…
Alloying metals with other elements is often done to improve the material strength or hardness. A key microscopic mechanism is precipitation hardening, where precipitates impede dislocation motion, but the role of such obstacles in…
We report results of large-scale molecular-dynamics (MD) simulations of dynamic deformation under biaxial tensile strain of pre-strained single-crystalline nanometer-scale-thick face-centered cubic (fcc) copper films. Our results show that…
We use computer simulations to study the behavior of atomically sharp and blunted cracks in various f.c.c. metals. The simulations use effective medium potentials which contain many-body interactions. We find that when using potentials…
Refractory body-centered cubic (BCC) metals and alloys are of extraordinary importance in modern technological and structural applications. However, their wider adoption in science and technology is severely restricted by low-temperature…
Crystalline materials exhibit an hysteresis behaviour when deformed cyclically. The origins of this tension-compression asymmetry have been fully understood only recently as being caused by an asymmetry in the junction strength and a…
Extreme localization of damage in conventional brittle materials is the source of a host of undesirable effects. We show how artificially engineered metamaterials with all brittle constituents can be designed to ensure that every breakable…
Understanding the mechanisms of plasticity in structural steels is essential for the operation of next-generation fusion reactors. Elemental composition, particularly the amount of Cr present, and irradiation can have separate and…
A physically-informed continuum crystal plasticity model is presented to elucidate the deformation mechanisms and dislocation evolution in body-centered-cubic (bcc) tantalum widely used as a key structural material for mechanical and…
Over low and intermediate strain rates, plasticity in face centered cubic (FCC) metals is governed by the glide of dislocations, which manifest as complex networks that evolve with strain. Considering the elastic anisotropy of FCC metals,…