Related papers: Electromagnetic Noise Characterization and Suppres…
In this Comment, we discuss recent approaches to electromagnetic interference (EMI) mitigation in low-field Magnetic Resonance Imaging (LF-MRI), as presented in arXiv preprints 2509.05955v1, 2406.17804v3, or 2210.06730v2. These and other…
Portable ultra-low field MRI (ULF-MRI) systems operated in unshielded environments are susceptible to electromagnetic interference (EMI). Subject presence in the imaging region will lead to substantial noise increases, yet the dominant…
This paper analyzes conventional and deep learning methods for eliminating electromagnetic interference (EMI) in MRI systems. We compare traditional analytical and adaptive techniques with advanced deep learning approaches. Key strengths…
Ultra-low field magnetic resonance imaging(ULF-MRI) systems operating in open environments are highly susceptible to composite electromagnetic interference(EMI). Different imaging channels respond non-uniformly to EMI owing to their…
At present, MRI scans are performed inside a fully-enclosed RF shielding room, posing stringent installation requirement and unnecessary patient discomfort. We aim to develop an electromagnetic interference (EMI) cancellation strategy for…
Electromagnetic interference (EMI) is a significant challenge for low-field MRI systems operating without conventional Faraday-shielded rooms. Traditional EMI mitigation approaches include external shields, subject grounding via electrodes,…
Purpose: One of the intrinsic limitations of low-field MRI is low signal-to-noise ratio (SNR), which can be further reduced by electromagnetic interference (EMI) due to the lack of a Faraday shielded room. To address this issue, we propose…
Purpose. Portable low-field (< 0.1 T) MRI is increasingly used for point-of-care imaging, but electromagnetic interference (EMI) presents a significant challenge, especially in unshielded environments. EMI can degrade image quality and…
Scanning Electron Microscopy (SEM) is critical in nanotechnology, materials science, and biological imaging due to its high spatial resolution and depth of focus. Signal-to-noise ratio (SNR) is an essential parameter in SEM because it…
This paper presents the design and experimental characterization of a 1 T electromagnet tailored to meet the demands of a Magnetic Resonance Imaging (MRI) system conceived for spatial resolutions at the level of tens of microns. For high…
Medical imaging modalities including magnetic resonance imaging (MRI), computed tomography (CT), and ultrasound are essential for accurate diagnosis and treatment planning in modern healthcare. However, noise contamination during image…
When deploying a spectrometer in an adverse environment, such as during a typical ODNP experiment or experiments that require low-volume low-field measurements, a clear and modern protocol for characterizing and quantifying the absolute…
Quantitative electron magnetic circular dichroism (EMCD) in transmission electron microscopy (TEM) enables the measurement of magnetic moments with elemental and atomic site sensitivity, but its practical application is fundamentally…
Low-field (LF) magnetic resonance imaging (MRI) improves accessibility and reduces costs but generally has lower signal-to-noise ratios and degraded contrast compared to high field (HF) MRI, limiting its clinical utility. Simulating LF MRI…
Magnetic Resonance Imaging (MRI) is an essential diagnostic tool in clinical settings but its utility is often hindered by noise artifacts introduced during the imaging process. Effective denoising is critical for enhancing image quality…
Single-channel SQUID system technology, operating at a noise level of 100s of aT/$\sqrt{\textrm{Hz}}$, enables the non-invasive detection of synchronized spiking activity at the single-trial level via magnetoencephalography (MEG). However,…
The acquisition of MRI images offers a trade-off in terms of acquisition time, spatial/temporal resolution and signal-to-noise ratio (SNR). Thus, for instance, increasing the time efficiency of MRI often comes at the expense of reduced SNR.…
Magnetic resonance imaging (MRI) is the cornerstone technique for diagnostic medicine, biology, and neuroscience. This imaging method is highly innovative, noninvasive and its impact continues to grow. It can be used for measuring changes…
Patient scans from MRI often suffer from noise, which hampers the diagnostic capability of such images. As a method to mitigate such artifact, denoising is largely studied both within the medical imaging community and beyond the community…
This paper introduces a novel framework for image quality transfer based on conditional flow matching (CFM). Unlike conventional generative models that rely on iterative sampling or adversarial objectives, CFM learns a continuous flow…