Related papers: On-chip stencil lithography for superconducting qu…
Superconducting qubit fabrication innovations continue to be explored to achieve higher performance. Despite improvements to base layer fabrication and processing, resist-based Josephson junction (JJ) schemes have largely remained…
Qubit information processors are increasing in footprint but currently rely on e-beam lithography for patterning the required Josephson junctions (JJs). Advanced optical lithography is an alternative patterning method, and we report on the…
The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a…
A minimal method to fabricate Al/AlO$_x$/Al Josephson junctions (JJs) using photolithography and argon etching, before metallization and oxidation, is demonstrated. JJs with areas ranging from 1 to 6 $\mu$m$^2$ can be fabricated and, with…
We introduce a simplified fabrication technique for Josephson junctions and demonstrate superconducting Xmon qubits with $T_1$ relaxation times averaging above 50$~\mu$s ($Q>$1.5$\times$ 10$^6$). Current shadow-evaporation techniques for…
The superconducting qubit is one of the promising directions in realizing fault-tolerant quantum computing (FTQC), which requires many high-quality qubits. To achieve this, it is desirable to leverage modern semiconductor industry…
We have developed a combined photolithography and electron-beam lithography fabrication process for sub-\mum to \mum-size Nb/Al-AlOx/Nb Josephson junctions. In order to define the junction size and protect its top electrode during anodic…
Shadow evaporation is commonly used to micro-fabricate the key element of superconducting qubits - the Josephson junction. However, in conventional two-angle deposition circuit topology, unwanted stray Josephson junctions are created which…
One of the practical limitations of solid-state superconducting quantum processors technology is frequency crowding due to low qubits fabrication reproducibility. Josephson junction 100 nm-scale nonlinear inductance of the qubits still…
Stencil mask lithography is an advanced technique for fully in-situ fabricating Josephson junctions, which is increasingly being used for multi-terminal Josephson junctions. This study provides information on the optimal mask design and…
Josephson tunnel junctions are the centerpiece of almost any superconducting electronic circuit, including qubits. Typically, the junctions for qubits are fabricated using shadow evaporation techniques to reduce dielectric loss…
Fabrication of sub-micron Josephson junctions is demonstrated using standard processing techniques for high-coherence, superconducting qubits. These junctions are made in two separate lithography steps with normal-angle evaporation. Most…
For high-performance superconducting quantum devices based on Josephson junctions (JJs) decreasing lateral sizes is of great importance. Fabrication of sub-\mu m JJs is challenging due to non-flat surfaces with step heights of up to several…
Nanofabrication techniques for superconducting qubits rely on resist-based masks patterned by electron-beam or optical lithography. We have developed an alternative nanofabrication technique based on free-standing silicon shadow masks…
Hybrid devices comprised of topological insulator (TI) nanostructures in proximity to s-wave superconductors (SC) are expected to pave the way towards topological quantum computation. Fabrication under ultra-high vacuum conditions is…
The realization of a topological qubit calls for advanced techniques to readily and reproducibly engineer induced superconductivity in semiconductor nanowires. Here, we introduce an on-chip fabrication paradigm based on shadow walls that…
The Josephson junction (JJ) is the corner stone of superconducting electronics and quantum information processing. While the technology for fabricating low $T_{c}$ JJ is mature and delivers quantum circuits able to reach the "quantum…
Josephson junctions (JJs) with Josephson energy $E_J \lesssim 1K$ are widely employed as non-linear elements in superconducting circuits for quantum computing, operating at milli-Kelvin temperatures. Here we experimentally study incoherent…
We present a novel shadow evaporation technique for the realization of junctions and capacitors. The design by E-beam lithography of strongly asymmetric undercuts on a bilayer resist enables in-situ fabrication of junctions and capacitors…
We have developed a fabrication technology for the development of large-scale superconducting integrated circuits with Nb-based Josephson junctions. The standard fabrication process with 10 mask levels uses four metal layers including 3 Nb…