Related papers: Ultra-High-Temperature Vacuum Prober for Electrica…
Advances in next-generation hypersonic hot structures, high heat-flux fusion or fission components, and laser based additive manufacturing depend on reliable solid state thermal conductivity data at high and ultrahigh temperatures, where…
A suspended system for measuring the thermal properties of membranes is presented. The sensitive thermal measurement is based on the 3$\omega$ dynamic method coupled to a V$\ddot{o}$lklein geometry. The device obtained using micro-machining…
We describe a compact ultra-high vacuum (UHV) scanning tunneling microscope (STM) system that does not need any external supply of cooling liquids. It achieves temperatures down to 1.5 K and a z-noise down to 300 fmRMS for the frequency…
We have built a variable temperature scanning probe microscope (SPM) that covers 4.6 K - 180 K and up to 7 Tesla whose SPM head fits in a 52 mm bore magnet. It features a temperature-controlled sample stage thermally well isolated from the…
We present a new technique for measuring the critical temperature Tc in the high pressure, high Tc electron-phonon-driven superconducting hydrides. This technique does not require connecting leads to the sample. In the multiphonon region of…
Quantum inertial sensors test general relativity, measure fundamental constants, and probe dark matter and dark energy in the laboratory with outstanding accuracy. Their precision relies heavily on carefully choreographed quantum control of…
We present the construction and performance of an ultra-low temperature scanning tunneling microscope (STM), working in ultra-high vacuum conditions (UHV) and in high magnetic fields up to 9 T. The cryogenic environment of the STM is…
We present a new concept of scanning thermal nanoprobe that utilizes the extreme thermal conductance of a carbon nanotube (CNT) to channel heat between the probe and the sample. The integration of CNT in scanning thermal microscopy (SThM)…
We report on high-temperature sensing measurements using a tubular-lattice hollow-core photonic crystal fiber displaying a microstructure formed of eight 2.4 um-thick cladding tubes. The larger thickness of our fiber's cladding tubes…
This paper presents the development of instrumentation for the measurement of high-temperature thermal conductivity of bulk and coatings using a modulated photothermal radiometry (MPR) method, where a sample is heated by an…
This work builds on the previous introduction [1] of a coupled experimental-computational system devised to fully characterize the thermal behavior of complex 3D submicron electronic devices. The new system replaces the laser-based surface…
A simple and low cost apparatus has been designed and built to measure the electrical resistivity, ($\rho$), of metal and semiconductors in 300-620 K temperature range. The present design is suitable to do measurement on rectangular bar…
Graphene is a material with remarkable electronic properties and exceptional thermal transport properties near room temperature, which have been well examined and understood. However at very low temperatures the thermodynamic and thermal…
State-of-the-art techniques like dual-frequency Time-Domain Thermoreflectance (TDTR) and Frequency-Domain Thermoreflectance (FDTR) offer superb capability for simultaneous measurements of thermal conductivity and heat capacity with a…
Ultrathin microscale resistive thermometers are of key value to many applications. Here we have fabricated a laser machined 50 ${\mu}$m wide and 50 nm thick serpentine Pt thin film sensor capable of sensing temperatures up to 650 ${^\circ}$…
Poly (3-hexylthiophene) (P3HT) was thermally evaporated and deposited in vacuum. Infrared spectroscopy was used to confirm that the thin films were indeed P3HT, and showed that in-situ thermal evaporation provides a viable route for…
We have developed a contact-less technique for the real time measurement of a-thermal (Cooper-pair breaking) phonons in an absorber held at sub-Kelvin temperatures. In particular, a thin-film aluminum superconducting resonator was realized…
We have extended the range of the high-pressure optical spectroscopy to the far-infrared region keeping the accuracy of ambient-pressure experiments. The newly-developed method offers a powerful tool for the study of pressure-induced phase…
Wide bandgap semiconductors have become the most attractive materials in optoelectronics in the last decade. Their wide bandgap and intrinsic properties have advanced the development of reliable photodetectors to selectively detect short…
Scanning Thermal Microscopy (SThM) has become an important measurement tool for characterizing the thermal properties of materials at the nanometer scale. This technique requires a SThM probe that combines an Atomic Force Microscopy (AFM)…