Related papers: Predictions of flow distortions inside a serpentin…
In this study, we conduct a parametric analysis to evaluate the sensitivities of wall-modeled large-eddy simulation (LES) with respect to subgrid-scale (SGS) models, mesh resolution, wall boundary conditions and mesh anisotropy. While such…
A large eddy simulation (LES) with an extended Smagorinsky model has been carried to investigate numerically the fully developed turbulent flow of a shear thinning fluid (n=0.75) in a stationary pipe at a simulation's Reynolds number equals…
The development of a wall model using machine learning methods for the large-eddy simulation (LES) of separated flows is still an unsolved problem. Our approach is to leverage the significance of separated flow data, for which existing…
A wall model for large-eddy simulation (LES) is proposed by devising the flow as a combination of building blocks. The core assumption of the model is that a finite set of simple canonical flows contains the essential physics to predict the…
In this paper, wall-modeled large-eddy simulation (WMLES) is carried out with Ffowcs-Williams and Hawkings (FW-H) acoustic analogy to investigate the turbulent flow and hydrodynamic noise of an axisymmetric body of revolution. We first…
Wall-bounded turbulence is relevant for many engineering and natural science applications, yet there are still aspects of its underlying physics that are not fully understood, particularly at high Reynolds numbers. In this study, we…
We examine the role of anisotropic subgrid-scale (SGS) stress in wall-modeled large-eddy simulation (WMLES) of flow over a spanwise-uniform Gaussian-shaped bump, with emphasis on predicting flow separation. The simulations show that…
The problem of an accurate Eulerian-Lagrangian modeling of inertial particle dispersion in Large Eddy Simulation (LES) of turbulent wall-bounded flows is addressed. We run Direct Numerical Simulation (DNS) for turbulent channel flow at…
We investigate the error scaling and computational cost of wall-modeled large-eddy simulation (WMLES) for external aerodynamic applications. The NASA Juncture Flow is used as representative of an aircraft with trailing-edge smooth-body…
This work investigates the current wall-modeled large-eddy simulation (WMLES) capabilities of the open-source computational fluid dynamics solver OpenFOAM, which is used widely in academia and industry. This is achieved by a simulation…
Computational fluid dynamics (CFD) is a useful tool for prediction of turbulence in aerodynamic and biomedical applications. The choice of appropriate turbulence models is key to reaching accurate predictions. The present investigation…
For high-fidelity predictions of turbulent flows in complex practical engineering problems, the Wall-Modeled (WM) Large-Eddy Simulation (LES) has aroused great interest. In the present study, we prove that the conventional Wall-Stress…
A deep learning (DL) closure model for large-eddy simulation (LES) is developed and evaluated for incompressible flows around a rectangular cylinder at moderate Reynolds numbers. Near-wall flow simulation remains a central challenge in…
Wall-modeled large-eddy simulations (WMLES) are conducted for the flow over the Sandia Axisymmetric Transonic Bump (ATB) at bump chord Reynolds number, Re = 1x10^6 and Mach number, Ma = 0.875. Utilizing various subgrid-scale and wall…
We conduct wall-modeled LES (WMLES) of a pressure-driven three-dimensional turbulent boundary layer (3DTBL) developing on the floor of a bent square duct to investigate the predictive capability of three widely used wall models, namely, a…
Current design constraints have encouraged the studies of aeroacoustics fields around compressible jet flows. The present work addresses the numerical study of subgrid scale modeling for unsteady turbulent jet flows as a preliminary step…
Large Eddy Simulation (LES) with dynamic Smagorinsky model has been applied to numerically investigate the complicated flow structures that evolve in the near wake of a cylindrical after body aligned with a uniform Mach 2.46 flow. Mean flow…
We propose a framework for developing wall models for large-eddy simulation that is able to capture pressure-gradient effects using multi-agent reinforcement learning. Within this framework, the distributed reinforcement learning agents…
In many engineering and industrial applications, the investigation of rotating turbulent flow is of great interest. In rotor-stator cavities, the centrifugal and Coriolis forces have a strong influence on the turbulence by producing a…
The swirling secondary flow in curved pipes is studied in three-space dimensions using a weakly compressible Smoothed Particle Hydrodynamics (WCSPH) formulation coupled to new non-reflecting outflow boundary conditions. A large-eddy…