Related papers: Direct numerical simulation of complete transition…
We investigate the controlled K-type breakdown of a flat-plate boundary-layer with highly non-ideal supercritical fluid at a reduced pressure of $p_{r,\infty}=1.10$. Direct numerical simulations are performed at a Mach number of…
The mechanisms governing the transition to turbulence in natural convection boundary layers along strongly heated vertical walls remain neither very clear nor well understood, because of the lack of experiments and the difficulties of…
The transition to turbulence in a precessing cylindrical vessel is experimentally investigated. Our measurements are performed for a { nearly-resonant} configuration with an initially laminar flow dominated by an inertial mode with…
Mixing and heat transfer rates are typically enhanced when operating at high-pressure transcritical turbulent flow regimes. The rapid variation of thermophysical properties in the vicinity of the pseudo-boiling region can be leveraged to…
The transition to turbulence in conduits is among the longest-standing problems in fluid mechanics. Challenges in producing or saving energy hinge on understanding promotion or suppression of turbulence. While a global picture based on an…
Direct numerical simulations of free round jets at a Reynolds number ($Re_{D}$) of $5000$, based on jet diameter ($D$) and jet-exit bulk velocity ($U_{e}$), are performed to study jet turbulence characteristics at supercritical pressures.…
Hypersonic boundary layer transition using high-order methods for direct numerical simulations (DNS) is largely unexplored, although a few references exist in the literature. Experimental data in the hypersonic regime are scarce, while…
We study the statistics of free-surface turbulence at large Reynolds numbers produced by direct numerical simulations in a fluid layer at different thickness with fixed characteristic forcing scale. We observe the production of a transient…
The transitional boundary layer flow over a flat plate is investigated. The boundary layer flow is known to develop unstable Tollmien-Schlichting waves above a critical value of the Reynolds number. However, it is also known that this…
The turbulent boundary layer over a flat plate is computed by direct numerical simulation (DNS) of the incompressible Navier-Stokes equations as a test bed for a synthetic turbulence generator (STG) inflow boundary condition. The inlet…
We present direct numerical simulations (DNS) of laminar to turbulent transition in Herschel-Bulkley (HB) yield-stress fluids flowing through pipes and rectangular channels. The simulations employ a Herschel-Bulkley formulation that…
In this fluid dynamics video, recent simulations of transition to turbulence in compressible (M = 0.2), zero-pressure-gradient flat-plate boundary layers triggered by fundamental (Klebanoff K-type) and subharmonic (Herbert H-type) secondary…
The turbulence statistics of the intermittent region in a supersonic turbulent boundary layer are studied by direct numerical simulation. Recently, Kwon et al. (2016) have shown that this intermittent behavior, consisting of the coexistence…
We study the transition to turbulence in the asymptotic suction boundary layer (ASBL) by direct numerical simulation. Tracking the motion of trajectories intermediate between laminar and turbulent states we can identify the invariant object…
Direct numerical simulations have proven of inestimable help to our understanding of the transition to turbulence in wall-bounded flows. While the dynamics of the transition from laminar flow to turbulence via localised spots can be…
The interaction between an incident shock wave and a Mach-6 undisturbed hypersonic laminar boundary layer over a cold wall is addressed using direct numerical simulations (DNS) and wall-modeled large-eddy simulations (WMLES) at different…
The laminar-to-turbulent transition remains a fundamental and enduring challenge in fluid mechanics. Its complexity arises from the intrinsic nonlinearity and extreme sensitivity to external disturbances. This transition is critical in a…
A pair of Direct Numerical Simulations is used to investigate curvature and pressure effects. One has a Gaussian test bump and a straight opposite wall, while the other has a straight test wall and a blowing/suction distribution on an…
The dynamics of a shock wave impinging on a transitional high-enthalpy boundary layer out of thermochemical equilibrium is investigated for the first time by means of a direct numerical simulation. The freestream Mach number is equal to 9…
Experiments (Mullin and Kreswell, 2005) show that transition to turbulence can start at Reynolds numbers lower than it is predicted by the linear stability analysis - the subcritical transition to turbulence. To explain these observations…