Related papers: Lattice Mismatch Driven In Plane Strain Engineerin…
Superconducting MgB(2) films with Tc = 38.6 K were prepared using a precursor-deposition, ex-situ post-processing approach. Precursor films of boron, ~0.5 micrometer thick, were deposited onto Al(2)O(3) (102) substrates by e-beam…
We performed systematic studies on the transport properties of FeSe thin films with controlled degrees of in-plane lattice strain, including both tensile and compressive strains. The superconducting transition temperature, $T_{\mathrm c}$,…
We have investigated the influence of the superconducting layer thickness, d, on the structural and transport properties of Co-doped BaFe2As2 films deposited on Fe-buffered MgO substrates by pulsed laser deposition. The superconducting…
Thin superconducting films are usually regarded as type II superconductors even when they are made of a type I material. The reason is a strong contribution of the stray magnetic field that stabilizes vortices. While very thin films indeed…
Recently, the films of the Ruddlesden-Popper (RP) nickelate superconductors, in which the (La,Pr)$_3$Ni$_2$O$_7$ system exhibits a remarkable transition temperature $T_c$ exceeding 40 K, were synthesized at ambient pressure. We…
Vanadium dioxide with metal-to-insulator transition (MIT) that is triggered by heat, current or light is a promising material for modern active THz/mid-IR metasurfaces and all-optical big data processing systems. Multilayer VO2-based active…
Superconducting properties of thin films can be vastly different from those of bulk materials. Seminal work has shown the critical temperature Tc of elemental superconductors decreases with decreasing film thickness when the normal-state…
Uniformity in thickness and electronic properties of superconducting niobium titanium nitride (NbTiN) thin films is a critical issue for upscaling superconducting electronics, such as microwave kinetic inductance detectors for submillimeter…
We report on the influence of the chemical composition on the electronic properties of molybdenum oxynitrides thin films grown by reactive sputtering on Si (100) substrates at room temperature. The partial pressure of Ar was fixed at 90 %,…
Superconducting MgB2 thin films were fabricated on Al2O3(0001) substrates under an ex-situ processing conditions. Boron thin films were deposited by pulsed laser deposition followed by a post-annealing process. Resistance measurements of…
We demonstrate that the electronic properties of epitaxial SmN thin films can be effectively tuned during growth by controlling the synthesis parameters. By carefully adjusting these parameters, we are able to drive SmN from an insulating…
The discovery of superconductivity in 3$d$-transition metal compounds with strong magnetism is interesting but rare. Especially for Mn-based compounds, there exist only very limited materials that show superconductivity. Here, we report the…
Disorder driven superconductor to insulator transition via intermediate metallic regime is reported in nano-crystalline thin films of molybdenum. The nano-structured thin films have been deposited at room temperature using DC magnetron…
Spin gapless semiconductors are interesting novel class of materials by embracing both magnetism and semiconducting. Its potential application in future spintronics requires realization in thin film form. In this letter, we report a…
Ternary transition-metal nitrides with layered crystal structures host anisotropic bonding and reduced dimensionality that may enable unconventional electronic and magnetic behavior. Yet, synthesis of such nitride thin films remains…
The influence of the buffer layer of hafnia dielectric on superconducting properties of niobium nitride films, produced by the technique of the reactive magnetron depositing has been investigated for the first time. This study presents a…
Employing amorphous superconductors, such as Type-II molybdenum silicide (MoSi), instead of crystalline materials significantly simplifies the material deposition and scalable nanoscale prototyping, beneficial for quantum electronic and…
The review considers bulk MgB2-based materials in terms of their structure, superconducting and mechanical properties. Superconducting transition temperatures of 34.5-39.4 K, critical current densities of 1.8-1.0 x E6 A/sq.cm in self field…
We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly…
Orthorhombic II-IV nitride semiconductors offer an expanded and more tunable material set with unique properties, while maintaining close compatibility with the wurtzite crystal structure of the III-nitrides. In particular, MgSiN2, a II-IV…