Related papers: X-ray mirror figure correction using differential …
Digital micromirror devices have gained popularity in wavefront shaping, offering a high frame rate alternative to liquid crystal spatial light modulators. They are relatively inexpensive, offer high resolution, are easy to operate, and a…
The commonly used radial distortion model for camera calibration is in fact an assumption or a restriction. In practice, camera distortion could happen in a general geometrical manner that is not limited to the radial sense. This paper…
Fabricating freeform mirrors relies on accurate optical figuring processes capable of arbitrarily modifying low-spatial frequency height without creating higher-spatial frequency errors. We present a scalable process to accurately figure…
We demonstrate fiber Fabry-Perot (FFP) cavities with concave mirrors that can be operated at cavity lengths as large as 1.5mm without significant deterioration of the finesse. This is achieved by using a laser dot machining technique to…
The need for both high quality images and lightweight structures is one of the main drivers in space telescope design. An efficient wavefront control system will become mandatory in future large observatories, retaining performance while…
Speckle photography can be used to monitor deformations of solid surfaces. The measuring characteristics, such as range or lateral resolution depend heavily on the optical recording and illumination set-up. This paper shows how, by the…
Conventional x-ray imaging detectors suffer from parallax error when the radiation beam arrives at the detector surface at tilted angle. The image blurring occurs as the radiation penetrates detector material in lateral direction at tilted…
Direct imaging of exoplanet systems requires the use of coronagraphs to reach high contrast levels (10^-8 to 10^-11) at small angular separations (0.1"). However, the performance of these devices is drastically limited by aberrations (in…
This study describes a new approach for material decomposition in x-ray imaging, utilising phase contrast to both increase sensitivity to weakly-attenuating samples and to act as a complementary measurement to attenuation, therefore…
In projection-based magnetic particle imaging (MPI) with a field-free-line (FFL) encoding scheme, projection data are usually acquired by moving the FFL in a zigzag and a difference in the projection data occurs depending on the scanning…
The "dirty" image made by direct Fourier inversion of visibility data is an important first step in inteferometric imaging. This is where the "deconvolution problem" is defined and the degree to which that problem is either well- or…
We experimentally demonstrate that pairs of time-delayed ultrabright and ultrashort X-ray pulses of two different colors, delivered by modern X-ray Free Electron Lasers, can provide two time-delayed snapshots of a sample. We introduce…
Most distortion correction methods focus on simple forms of distortion, such as radial or linear distortions. These works undistort images either based on measurements in the presence of a calibration grid, or use multiple views to find…
With the advent of both modern X-ray fluorescence (XRF) methods and improved analytical reliability requirements the demand for suitable reference samples has increased. Especially in nanotechnology with the very low areal mass depositions,…
Diffractive lenses have recently been applied to the domain of multispectral imaging in the X-ray and UV regimes where they can achieve very high resolution as compared to reflective and refractive optics. Conventionally, spectral…
The aberrations induced by the sample and/or by the sample holder limit the resolution of optical microscopes. Wavefront correction can be achieved using a deformable mirror with wavefront sensorless optimization algorithms but, despite the…
A solution to the inversion problem of scattering would offer aberration-free diffraction-limited 3D images without the resolution and depth-of-field limitations of lens-based tomographic systems. Powerful algorithms are increasingly being…
Using spherical mirrors in place of wide-angle cameras allows for cost-effective monitoring of manufacturing processes in hazardous environment, where a camera would normally not operate. This includes environments of high heat, vacuum and…
We theorize the surface step characterization by reflected incoherent-light differential interference microscopy with consideration of the optical diffraction effect. With the integration of localization analysis, we develop a quantitative…
X-ray imaging is the most widely used medical imaging modality. However, in the common practice, inconsistency in the initial presentation of X-ray images is a common complaint by radiologists. Different patient positions, patient habitus…