Related papers: Transitional and Near-Wall Turbulence Dynamics ove…
Numerical and experimental studies have demonstrated the drag-reducing potential of carefully designed streamwise-elongated riblets in lowering skin-friction drag. To support the systematic design of such surface corrugations, recent…
Surface roughness significantly impacts transition to turbulence, especially over high-speed, blunt geometries where surface ablation is necessary to mitigate heat loads during atmospheric entry. Inspired by sand-grain roughness experiments…
The influence of surface roughness on transition to turbulence in a Mach 4.5 boundary layer is studied using direct numerical simulations. Transition is initiated by the nonlinearly most dangerous inflow disturbance, which causes the…
Aquatic animals have developed effective strategies to reduce their body drag over a long period of time. In this work, the influence of the scales of fish on the laminar-to-turbulent transition in the boundary layer is investigated. Arrays…
Both experiments and direct numerical simulations have been used to demonstrate that riblets can reduce turbulent drag by as much as $10\%$, but their systematic design remains an open challenge. In this paper, we develop a model-based…
Knowledge of turbulent flows over non-flat surfaces is of major practical interest in diverse applications. Significant work continues to be reported in the roughness regime at high Reynolds numbers where the cumulative effect of surface…
A bird-feather-inspired herringbone riblet texture was investigated for turbulent drag reduction. The texture consists of blade riblets in a converging/diverging or herringbone pattern with spanwise wavelength $\Lambda_f$. The aim is to…
Superhydrophobic surfaces dramatically reduce skin friction of overlying liquid flows. These surfaces are complex and numerical simulations usually rely on models for reducing this complexity. One of the simplest consists in finding an…
This manuscript has been accepted for publication in Physical Review Fluids, see https://journals.aps.org/prfluids/accepted/d5074S28J6b11905012b7cb06505e8f2149dd5f20. This work investigates the mechanisms that underlie transitions to…
In this work, the stability and transition to turbulence over a blunt flat plate with different leading-edge radii are investigated computationally. The freestream Mach number is 5, the unit Reynolds number is $6\times10^7$ m$^{-1}$, and…
The complex interaction between turbulence and the free surface in boundary layer shear flow created by a vertical surface-piercing wall is considered. A laboratory-scale device was built that utilizes a surface-piercing stainless steel…
Direct numerical simulations of turbulent channels with rough walls are conducted in the transitionally rough regime. The effect that roughness produces on the overlying turbulence is studied using a modified triple decomposition of the…
A large eddy simulation (LES) with an extended Smagorinsky model has been carried to investigate numerically the fully developed turbulent flow of a shear thinning fluid (n=0.75) in a stationary pipe at a simulation's Reynolds number equals…
Wall-bounded flows experience a transition to turbulence characterized by the coexistence of laminar and turbulent domains in some range of Reynolds number R, the natural control parameter. This transitional regime takes place between an…
The transition to turbulence in a precessing cylindrical vessel is experimentally investigated. Our measurements are performed for a { nearly-resonant} configuration with an initially laminar flow dominated by an inertial mode with…
We investigate rough-wall turbulent flows through direct numerical simulations of flow over three-dimensional transitionally rough sinusoidal surfaces. The roughness Reynolds number is fixed at $k^+=10$, where $k$ is the sinusoidal…
Phase effect on the modal interaction of flow instabilities is investigated for laminar-to-turbulent transition in a flat-plate boundary layer flow. Primary and secondary instabilities are numerically studied with 2D Tollmien-Schlichting…
The objective of this work is to investigate the unexplored laminar-to-turbulent transition of a heated flat-plate boundary layer with a fluid at supercritical pressure. Two temperature ranges are considered: a subcritical case, where the…
This article utilizes the Large-Eddy Simulation (LES) paradigm with a physics-based turbulence modeling approach, including a dynamic subgrid-scale model and an equilibrium wall model, to examine the flow over the NASA transonic Common…
Direct numerical simulations of a low-pressure turbine with roughness elements distributed over the blade surface have been performed. A series of fifteen cases with varying roughness heights and streamwise wavenumbers are introduced to…