Related papers: Theoretical and Experimental Assessment of Large B…
There is a growing interest in codebook-based beam-steering for millimeter-wave (mmWave) systems due to its potential for low complexity and rapid beam search. A key focus of recent research has been the design of codebooks that strike a…
A beam codebook of 5G millimeter wave (mmWave) for data communication consists of multiple high-peak-gain beams to compensate the high pathloss at the mmWave bands. These beams also have to point to different angular directions, such that…
Millimeter wave (mmWave) and massive MIMO systems are intrinsic components of 5G and beyond. These systems rely on using beamforming codebooks for both initial access and data transmission. Current beam codebooks, however, generally consist…
Scaling the number of antennas up is a key characteristic of current and future wireless communication systems. The hardware cost and power consumption, however, motivate large-scale MIMO systems, especially at millimeter wave (mmWave)…
Millimeter wave (mmWave) communications can potentially meet the high data-rate requirements of unmanned aerial vehicle (UAV) networks. However, as the prerequisite of mmWave communications, the narrow directional beam tracking is very…
This paper develops a novel methodology for designing analog beamforming codebooks for full-duplex millimeter wave (mmWave) transceivers, the first such codebooks to the best of our knowledge. Our design reduces the self-interference…
The use of the millimeter (mm) wave spectrum for next generation (5G) mobile communication has gained significant attention recently. The small carrier wavelengths at mmwave frequencies enable synthesis of compact antenna arrays, providing…
Millimeter-wave (mmWave) systems use directional beams to support high-rate data communications. Small misalignment between the transmit and receive beams (e.g., due to the mobility) can result in significant drop of the received signal…
Millimeter wave (mmWave) and terahertz MIMO systems rely on pre-defined beamforming codebooks for both initial access and data transmission. Being pre-defined, however, these codebooks are commonly not optimized for specific environments,…
The number of radio frequency (RF) chains can be reduced through beam selection in lens-based millimeter-wave (mmWave) massive MIMO systems, where the equivalent channel between RF chains and multiple users is required at the BS to achieve…
In pursuance of the unused spectrum in higher frequencies, millimeter wave (mmWave) bands have a pivotal role. However, the high path-loss and poor scattering associated with mmWave communications highlight the necessity of employing…
The surge in mobile broadband data demands is expected to surpass the available spectrum capacity below $6$ GHz. This expectation has prompted the exploration of millimeter wave (mm-wave) frequency bands as a candidate technology for next…
The surge in mobile broadband data demands is expected to surpass the available spectrum capacity below 6 GHz. This expectation has prompted the exploration of millimeter wave (mm-wave) frequency bands as a candidate technology for next…
Millimeter wave (mm-wave) communications is considered a promising technology for 5G networks. Exploiting beamforming gains with large-scale antenna arrays to combat the increased path loss at mm-wave bands is one of its defining features.…
Analog beamforming with phased arrays is a promising technique for 5G wireless communication in millimeter wave bands. A beam focuses on a small range of angles of arrival or departure and corresponds to a set of fixed phase shifts across…
Beamforming technology is widely used in millimeter wave systems to combat path losses, and beamformers are usually selected from a predefined codebook. Unfortunately, the traditional codebook design neglects the beam squint effect, and…
In millimeter-wave communication, large antenna arrays are required to achieve high power gain by steering towards each other with narrow beams, which poses the problem to efficiently search the best beam direction in the angle domain at…
Millimeter-wave transceivers use large antenna arrays to form narrow high-directional beams and overcome severe attenuation. Narrow beams require large signaling overhead to be aligned if no prior information about beam directions is…
In this study, we analyze the codebook design used for analog beamforming. Analog beamforming and combining suffer from a subspace sampling limitation, that is, the receiver cannot directly observe the channel coefficients; instead, the…
Beam alignment - the process of finding an optimal directional beam pair - is a challenging procedure crucial to millimeter wave (mmWave) communication systems. We propose a novel beam alignment method that learns a site-specific probing…