Related papers: Simultaneous Multi-Beam Radar with Full Range Reso…
Modern radars employing wideband signals and extremely large (XL) multiple-input multiple-output (MIMO) arrays can significantly improve range and angular resolution. However, when large bandwidth and array aperture are used simultaneously,…
Beamforming techniques are proposed for a joint multi-input-multi-output (MIMO) radar-communication (RadCom) system, where a single device acts both as a radar and a communication base station (BS) by simultaneously communicating with…
Hybrid digital/analog architecture and low-resolution analog-to-digital/digital-to-analog converters (ADCs /DACs) are two low-cost implementations for large-scale millimeter wave (mmWave) systems. In this paper, we investigate the problem…
In this paper, we focus on constant-modulus waveform design for the dual use of radar target detection and cellular transmission. As the MIMO radar typically transmits orthogonal waveforms to search potential targets, we aim at jointly…
This paper addresses the problem of localizing an unknown number of targets, all having the same radar signature, by a distributed MIMO radar consisting of single antenna transmitters and receivers that cannot determine directions of…
Recently, frequency-modulated continuous wave (FMCW) radars with array antennas are gaining in popularity on a wide variety of commercial applications. A usual approach of the range and angle estimation of a target with an array FMCW radar…
Radar has become an essential sensor for autonomous navigation, especially in challenging environments where camera and LiDAR sensors fail. 4D single-chip millimeter-wave radar systems, in particular, have drawn increasing attention thanks…
A novel monostatic multiple-input multiple-output (MIMO) dual-function radar communication (DFRC) system is proposed, that uses the available bandwidth efficiently for both sensing and communication. The proposed system, referred to as…
One key feature of massive multiple-input multiple-output systems is the large number of antennas and users. As a result, reducing the computational complexity of beamforming design becomes imperative. To this end, the goal of this paper is…
The wide bandwidths available at millimeter-wave (mmWave) frequencies have offered exciting potential to wireless communication systems and radar alike. Communication systems can offer higher rates and support more users with mmWave bands…
As a cost-effective alternative, hybrid analog and digital beamforming architecture is a promising scheme for millimeter wave (mmWave) system. This paper considers two hybrid beamforming architectures, i.e. the partially-connected and…
We consider a spectral sharing problem in which a statistical (or widely distributed) multiple-input multiple-output (MIMO) radar and an in-band full-duplex (IBFD) multi-user MIMO (MU-MIMO) communications system concurrently operate within…
In radar systems, unimodular (or constant-modulus) waveform design plays an important role in achieving better clutter/interference rejection, as well as a more accurate estimation of the target parameters. The design of such sequences has…
We present a compressive radar design that combines multitone linear frequency modulated (LFM) waveforms in the transmitter with a classical stretch processor and sub-Nyquist sampling in the receiver. The proposed compressive illumination…
Through-wall synthetic aperture radar (SAR) imaging is of significant interest for security purposes, in particular when using multi-static SAR systems consisting of multiple distributed radar transmitters and receivers to improve…
We present an architecture for scaling digital beamforming for wideband massive MIMO radar. Conventional spatial processing becomes computationally prohibitive as array size grows; for example, the computational complexity of MVDR…
We describe an hierarchical, frequency-domain beamforming architecture for synthesising a sky beam from the wideband antenna feeds of digital aperture arrays. The development of densely-packed, all-digital aperture arrays is an important…
We consider a hybrid active-passive radar system that employs a wireless source as a passive illuminator of opportunity (IO) and a co-channel active radar transmitter operating in the same frequency band to seek spectral efficiency. The…
Traditional radio map estimation (RME) techniques fail to capture multi-dimensional and dynamic characteristics of complex spectrum environments. Recent data-driven methods achieve accurate RME in spatial domain, but ignore physical prior…
This paper investigates dynamic hybrid beamforming (HBF) for a dual-function radar-communication (DFRC) system, where the DFRC base station (BS) simultaneously serves multiple single-antenna users and senses a target in the presence of…