Related papers: Cracking in polymer substrates for flexible device…
Brittle materials fail catastrophically. In consequence of their limited flaw-tolerance, failure occurs by localized fracture and is typically a dynamic process. Recently, experiments on epithelial cell monolayers have revealed that this…
In recent years, interfacial fracture becomes one of the most important problems in the assessment of reliability of electronics packaging. Especially, underfill resin is used with solder joints in flip chip packaging for preventing the…
Active control of wrinkling in soft film-substrate composites using electric fields is a critical challenge in tunable material systems. Here, we investigate the electro-mechanical instability of a soft dielectric film bonded to a…
This study investigated, experimentally and numerically, the fracturing behavior of thermoset polymer structures featuring cracks and sharp u-notches. It is shown that, even for cases in which the sharpness of the notch would suggest…
We formulate a theoretical model of the shear failure of a thin film tethered to a rigid substrate. The interface between film and substrate is modeled as a cohesive layer with randomly fluctuating shear strength/fracture energy. We…
When a flexible plate is peeled off a thin and soft elastic film bonded to a rigid support, uniformly spaced fingering patterns develop along their line of contact. While, the wavelength of these patterns depends only on the thickness of…
Compression-induced buckling instability of metal thin films on a compliant base result in surface wrinkles. A stiff thin film, perfectly bonded to an infinitely deep pre-stretched dielectric elastomer (DE) substrate, is considered. Linear…
Friction causes mechanical energy dissipation and material degradation in machinery and devices. While phononic friction is well understood via anharmonic lattice dynamics, the physics of electronic friction remains unclear due to…
We consider materials whose mechanical integrity is the result of a jamming process. We argue that such media are generically "fragile": unable to support certain types of incremental loading without plastic rearrangement. Fragility is…
Extreme localization of damage in conventional brittle materials is the source of a host of undesirable effects. We show how artificially engineered metamaterials with all brittle constituents can be designed to ensure that every breakable…
This paper investigates the effects of plasticity on the effective fracture toughness. A layered material is considered as a modelling system. An elastic-plastic phase-field model and a surfing boundary condition are used to study how the…
Soft composite solids are made of inclusions dispersed within soft matrices. They are ubiquitous in nature and form the basis of many biological tissues. In the field of materials science, synthetic soft composites are promising candidates…
Stress enhancement in the vicinity of brittle cracks makes the macro-scale failure properties extremely sensitive to the micro-scale material disorder. Therefore: (i) Fracturing systems often display a jerky dynamics, so-called crackling…
Fractures are a critical process in how materials wear, weaken, and fail whose unpredictable behavior can have dire consequences. While the behavior of smooth cracks in ideal materials is well understood, it is assumed that for real,…
Soft polymers are ubiquitous materials in nature and as engineering materials with properties varying from rate-independent to rate-dependent. Current fracture toughness measures are non-unique for rate-dependent soft materials for varying…
Differential shrinkage in particulate quasi-brittle materials causes microcracking which reduces durability in these materials by increasing their mass transport properties. A hydro-mechanical three-dimensional periodic network approach was…
We study experimentally the fracture mechanisms of a model cohesive granular medium consisting of glass beads held together by solidified polymer bridges. The elastic response of this material can be controlled by changing the cross-linking…
Cracks, the major vehicle for material failure, tend to accelerate to high velocities in brittle materials. In three-dimensions, cracks generically undergo a micro-branching instability at about 40% of their sonic limiting velocity. Recent…
For a comprehensive characterization of mechanical reliability of metallization layers on polymer substrates both electrical and mechanical degradation should be taken into account. Although it is evident that cracking of a conductive film…
We investigate two destabilization mechanisms for elastic polymer films and put them into a general framework: first, instabilities due to in-plane stress and second due to an externally applied electric field normal to the film's free…