Related papers: Mist formation during micro-explosion of emulsion …
Compared with traditional fuels, emulsified fuels can improve fuel atomization and combustion, and nanoparticles as additives have the potential to enhance combustion and reduce emissions. Previous studies on micro-explosion mainly…
Emulsion fuels have the potential to reduce both particulate matter and NOx emissions and can potentially improve the efficiency of combustion engines. However, their limited stability remains a critical barrier to practical use as an…
Continuous ultrasonic atomization in a closed chamber is expected to generate a mist with an equilibrium droplet concentration and size distribution. Such a mist of microdroplets with controllable mist density has been used for Aerosol Jet…
Mist/air two-phase flow is a promising cooling technique for many applications such as internal cooling of gas turbine blades. A significant enhancement of heat transfer can be achieved with a low mass fraction of droplets by utilizing the…
Emulsion droplets of silicone oil (PDMS) are widely used as antifoaming agents but, in the case of non-aqueous foams, the mechanisms responsible for the bursting of the films separating the bubbles remain unclear. We consider a ternary…
Three-dimensional, time-dependent direct simulations of step emulsification micro-devices highlight two essential mechanisms for droplet formation: first, the onset of an adverse pressure gradient driving a back-flow of the continuous phase…
We have developed an experimental device for studying the main mechanism of dust formation in electric arc furnace steelmaking: the burst of gas bubbles at the liquid steel surface. As in the case of the air-water system, the bubble-burst…
In dense molecular clouds collisions between dust grains alter the ISM-dust size distribution. We study this process by inserting the results from detailed numerical simulations of two colliding dust aggregates into a coagulation model that…
We delineate and examine the distinct breakup modes of evaporating water-in-oil emulsion droplets under acoustic levitation. The emulsion droplets consist of decane/dodecane/tetradecane as oil, while the water concentration is varied from…
The combustion characteristics of ethanol/Jet A-1 fuel droplets having three different proportions of ethanol (10%, 30%, and 50% by vol.) are investigated in the present study. The large volatility differential between ethanol and Jet A-1…
The present study is devoted to the detailed numerical analysis of the combustion waves propagation through the lean hydrogen-air mixtures with suspended micro-droplets of water. Considered gaseous mixtures are characterized by a relatively…
We investigate the effect of heating by luminosity sources in a simulation of clustered star formation. Our heating method involves a simplified continuum radiative transfer method that calculates the dust temperature. The gas temperature…
The present investigation deals with the puffing and micro-explosion characteristics in the combustion of a single droplet comprising butanol/Jet A-1, acetone-butanol-ethanol (A-B-E)/Jet A-1 blends, and A-B-E. The onset of nucleation,…
The formation of small droplets and bubbles in turbulent flows is a crucial process in geophysics and engineering, whose underlying physical mechanism remains a puzzle. In this letter, we address this problem by means of high-resolution…
The occurrence of concentration and temperature gradients in saline microdroplets evaporating directly in air makes them unsuitable for nucleation studies where homogeneous composition is required. This can be addressed by immersing the…
The temperature of newly forming dust is controlled by the radiation field. As dust forms around stars, stellar transients, quasars or supernovae, the grains must grow through a regime where they are stochastically heated by individual…
The gasification of multicomponent fuel drops is relevant in various energy-related technologies. An interesting phenomenon associated with this process is the self-induced explosion of the drop, producing a multitude of smaller secondary…
High speed microfluidic jets can be generated by a thermocavitation process: from the evaporation of the liquid inside a microfluidic channel, a rapidly expanding bubble is formed and generates a jet through a flow focusing effect. Here, we…
Pathogens in droplets on fomites and aerosols go through extreme physiochemical conditions, such as confinement and osmotic stress, due to evaporation. Still, these droplets are the predominant transmission routes of many contagious…
The study of vapor bubble growth following droplet vaporization in a superheated liquid involves research areas such as hydrodynamics, heat transfer, mass transfer, and thermodynamics. The interplay between these multiscale aspects is…