Related papers: Vortex transition and thermal mixing by pitching a…
This study employs high-fidelity fluid-structure interaction simulations to investigate design optimizations for wave-assisted propulsion (WAP) systems using flapping foils. Building on prior work that identified the leading-edge vortex…
A wide range of natural and industrial processes involve heat and mass transport in porous media. In some important cases the transported substance may undergo phase change, e.g. from liquid to solid and vice versa in the case of freezing…
A flexible foil undergoing pitching oscillations is studied experimentally in a wind tunnel with different imposed free stream velocities. The chord-based Reynolds number is in the range 1600--4000, such that the dynamics of the system is…
The dynamical vortex production, with a trap-confining time-dependent stirred potential, is studied by using mass-imbalanced cold-atom coupled Bose-Einstein condensates (BEC). The vortex formation is explored by considering that both…
Heat transfer simulations of the fused filament fabrication process are an important tool to predict bonding, residual stresses and strength of 3D printed parts. But in order to capture the significant thermal gradients that occur in the…
We present an experimental study of the mixing processes in a gravity current flowing on an inclined plane. The turbulent transport of momentum and density can be described in a very direct and compact form by a Prandtl mixing length model:…
Thermal convection of fluid is a more efficient way than diffusion to carry heat from hot sources to cold places. Here, we experimentally study the Rayleigh-B\'enard convection of aqueous glycerol solution in a cubic cell with suspensions…
Molecular dynamics simulations are performed to investigate heterogeneous dynamics in amorphous glassy materials under oscillatory shear strain. We consider three-dimensional binary Lennard-Jones mixture well below the glass transition…
Many additive manufacturing (AM) technologies rely on powder feedstock, which is fused to form the final part either by melting or by chemical binding with subsequent sintering. In both cases, process stability and resulting part quality…
G\"{o}rtler vortices in boundary layer flows over concave surfaces are caused by the imbalance between centrifugal effects and radial pressure gradients. Depending on various geometrical and/or freestream flow conditions, vortex breakdown…
The present study is a prelude to applying different flow control devices on pitching and plunging airfoils with the intention of controlling the growth of the leading edge vortex (LEV); hence, the lift under unsteady stall conditions. As a…
The objective of this work is to investigate the coupling of fluid dynamics, heat transfer and mass transfer during the impact and evaporation of droplets on a heated solid substrate. A laser-based thermoreflectance method is used to…
The motion of several plates in an inviscid and incompressible fluid is studied numerically using a vortex sheet model. Two to four plates are initially placed in-line, separated by a specified distance, and actuated in the vertical…
In this work, we investigate the dynamics of vortex-induced vibration of an elastically mounted cylinder with very low values of mass and damping. We use two methods to investigate this canonical problem: first we calculate the…
A common situation in galactic and intergalactic gas involves cold dense gas in motion relative to hot diffuse gas. Kelvin-Helmholtz instability creates a turbulent mixing layer and populates the intermediate-temperature phase, which often…
Turbulent flow past an equilateral triangular cylinder with splitter plate inserted downstream is numerically tested for different gap ratios (0, 0.5, 1, 1.5, 2) and plate dimensions (0, 1, 1.5) on the flow field and heat transfer…
Due to their low density and large specific surface area, metal foams are increasingly used as cellular materials that combine excellent structural and thermal properties. Their cellular structure makes them particularly suitable for use in…
We are investigating the effective heat transfer in complex systems involving porous media and surrounding fluid layers in the context of mathematical homogenization. We differentiate between two fundamentally different cases: Case (a),…
The heat transfer behavior of convection-driven dynamos in a rotating plane layer between two parallel plates, heated from below and cooled from the top, is investigated. At a fixed rotation rate (Ekman Number, $E=10^{-6}$) and fluid…
This study investigates the effect of vibration on the flow structure transitions in thermal vibrational convection (TVC) systems, which occur when a fluid layer with a temperature gradient is excited by vibration. Direct numerical…