Related papers: Epitaxial growth of KTiOAsO4 by pulsed laser depos…
We report that epitaxial Sr2IrO4 thin-films can be selectively grown using pulsed laser deposition (PLD). Due to the competition between the Ruddlesden-Popper phases of strontium iridates (Sr_{n+1}Ir_{n}O_{3n+1}), conventional PLD methods…
Pulsed laser deposition (PLD) is a versatile technique for growing epitaxial heterostructures of a wide variety of novel materials combinations. Achieving low-defect layers with atomically sharp interfaces by PLD requires careful management…
Recently, Bi2O2Se is discovered as a promising two-dimensional (2D) semiconductor for next generation electronics, due to its moderate bandgap size, high electron mobility and pronounced ambient stability. Meanwhile, it has been predicted…
We present results on growth of large area epitaxial ReS2 thin film both on c plane sapphire substrate and MoS2 template by pulsed laser deposition (PLD). Films tend to grow with (0001) ReS2 perpendicular to (0001) Al2O3 and (0001) ReS2…
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental…
We present a systematic growth study of epitaxial RuO$_2$(110) and IrO$_2$(110) on TiO$_2$(110) substrates by pulsed laser deposition. We describe the main challenges encountered in the growth process, such as a deteriorating material flux…
We heteroepitaxially grew cobalt-doped BaFe2As2 films on (La,Sr)(Al,Ta)O3 single-crystal substrates by pulsed laser deposition using four different wavelengths and investigated how the excitation wavelength and pulse energy affected growth.…
Pulsed Laser Deposition (PLD) is widely used to grow epitaxial thin films of quantum materials such as complex oxides. Here, we use in-situ X-ray scattering to study homoepitaxy of SrTiO$_3$ by energetic (e-) and thermalized (th-) PLD. We…
Vapor-pressure mismatched materials such as transition metal chalcogenides have emerged as electronic, photonic, and quantum materials with scientific and technological importance. However, epitaxial growth of vapor-pressure mismatched…
This paper reports on the structural and optical properties of Co-doped TiO2 thin films grown onto (0001) Al2O3 substrates by non-reactive pulsed laser deposition (PLD) using argon as buffer gas. It is shown that by keeping constant the…
Alternate stacking of a highly conducting metallic layer with a magnetic triangular layer found in delafossite PdCrO2 provides an excellent platform for discovering intriguing correlated quantum phenomena. Thin film growth of the material…
Homogeneous highly epitaxial LaSrMnO3 (LSMO) thin films have been grown on Yttria-stabilized-Zirconia (YsZ) / CeO2 buffer layers on technological relevant 4" silicon wafers using a Twente Solid State Technology B.V. (TSST) developed large…
Superconducting and epitaxially grown LaFeAsOF thin films were successfully prepared on (001)-oriented LaAlO3 substrates using pulsed laser deposition. The prepared thin films show exclusively a single in-plane orientation with epitaxial…
Non-collinear antiferromagnet Weyl semimetal $Mn_3Sn$ have attracted great research interest recently. Although large anomalous Hall effect, anomalous Nernst effect and magneto-optical effect have been observed in $Mn_3Sn$, most studies are…
Pulsed-laser deposition has been used to grow epitaxial thin films of the giant-dielectric-constant material CaCu_3Ti_4O_{12} on LaAlO_3 and SrTiO_3 substrates with or without various conducting buffer layers. The latter include…
High quality epitaxial thin-films of EuTiO3 have been grown on the (001) surface of SrTiO3 using pulsed laser deposition. In situ x-ray reflectivity measurements reveal that the growth is two-dimensional and enable real-time monitoring of…
An experimental study was conducted on controlling the growth mode of La0.7Sr0.3MnO3 thin films on SrTiO3 substrates using pulsed laser deposition (PLD) by tuning growth temperature, pressure and laser fluence. Different thin film…
We have studied the growth of Fe3O4 (111) epitaxial films on Al2O3 (001) substrates using a pulsed laser deposition / thermal reduction cycle using an {\alpha}-Fe2O3 target. While direct deposition onto the Al2O3 (001) substrates results in…
Ca- and Zn-subsituted Y1-xCaxBa2(Cu1-yZny)O7-delta (x = 0, 0.05 and y = 0, 0.02, 0.04, 0.05) thin films were grown on SrTiO3 (100) substrates using the pulsed laser deposition (PLD) technique. Effects of various growth parameters on the…
Two-dimensional materials have attracted growing interest due to their unique electronic properties and potential applications in spintronics. Interfacing strongly spin-orbit-coupled chalcogenides with functional oxides such as perovskites…