Related papers: Practical 1-um GHz fiber comb on silica-based plat…
Frequency combs are powerful tools for many applications and high performances are achieved by stabilizing these lasers. For operation in the mid-infrared, quantum cascade lasers (QCL) are ideal candidates as they present numerous…
Cryogenic single-crystal optical cavities have the potential to provide highest dimensional stability. We have investigated the long-term performance of an ultra-stable laser system which is stabilized to a single-crystal silicon cavity…
We demonstrate a stable CMOS-compatible on-chip multiple-wavelength source by filtering and modulating individual lines from a frequency comb generated by a microring resonator optical parametric oscillator.. We show comb operation in a…
Modelocked frequency comb lasers have always operated with a single pulse circulating in the laser cavity. This meant that each laser technology had an associated limit on pulse repetition rate. Achieving higher rates required different…
For the first time to our knowledge, a dual-comb laser based on thin-disk technology and its application to direct frequency comb spectroscopy are presented. The peak power (0.6 MW) and the average power (12 W) of our Yb:YAG thin-disk…
Low-noise microwave oscillators are cornerstones for wireless communication, radar and clocks. Optical frequency combs have enabled photonic microwaves with unrivalled noise performance and bandwidth. Emerging interest is to generate…
We have generated frequency combs spanning 0.5 to 20 GHz in superconducting half wave resonators at T=3 K. Thin films of niobium-titanium nitride enabled this development due to their low loss, high nonlinearity, low frequency dispersion,…
The counting and control of optical cycles of light has become common with modelocked laser frequency combs. But even with advances in laser technology, modelocked laser combs remain bulk-component devices that are hand-assembled. In…
We report on an ultralow noise optical frequency transfer from a remotely located Sr optical lattice clock laser to a Ti:Sapphire optical frequency comb through telecom-wavelength optical fiber networks. The inherent narrow linewidth of the…
We combine a tunable continuous-wave optical parametric oscillator and a femtosecond Ti:Sapphire laser frequency comb to provide a phase-coherent bridge between the visible and mid-infrared spectral ranges. As a first demonstration of this…
We present quasi-real-time dual-comb spectroscopy (DCS) using two Yb:fiber combs with ~750 MHz repetition rates. A computational coherent averaging technique is employed to correct timing and phase fluctuations of the measured dual-comb…
Infrared spectroscopy is a powerful tool for basic and applied science. The molecular spectral fingerprints in the 3 um to 20 um region provide a means to uniquely identify molecular structure for fundamental spectroscopy, atmospheric…
We present detailed studies of the coherence properties of an ultra-broadband super-continuum, enabled by a new approach involving continuous wave laser sources to independently probe both the amplitude and phase noise quadratures across…
We demonstrate a compact 29.3 GHz visible astro-comb covering the spectrum from 560nm to 700nm. A 837 MHz Yb:fiber laser frequency comb phase locked to a Rb clock served as the seed comb to ensure the frequency stability and high side mode…
We report on transferring 1E-16-level fractional frequency stability of a "master laser" operated at 1.5 {\mu}m to a "slave laser" operated at 698 nm, using a femtosecond fiber comb as transfer oscillator. With the 698 nm laser, the 1S_0 -…
We report a multi-channel optical frequency synthesizer developed to generate extremely stable continuous wave lasers directly out of the optical comb of an Er-doped fiber oscillator. Being stabilized to a high-finesse cavity with a…
Single-cycle optical pulses offer a strong carrier-envelope-offset (CEO) dependent electric field and the highest peak intensity for a given pulse energy. Absence of demonstrated GHz single-cycle lasers constrains exploration of…
An ultrafast laser based on coherent beam combination of four ytterbium-doped step-index fiber amplifiers is presented. The system delivers an average power of 3.5 kW and a pulse duration of 430 fs at 80 MHz repetition rate. The beam…
Reducing the pulse repetition rate of an optical frequency comb increases the pulse energy for a given average power. This enhances the efficiency of nonlinear frequency conversion and it facilitates extending the accessible wavelength…
Optical frequency combs based on mode-locked lasers have proven to be invaluable tools for a wide range of applications in precision spectroscopy and metrology. A novel principle of optical frequency comb generation in whispering-gallery…