Related papers: Thermally-induced microstructural evolution in nan…
This study focuses on enhancing the electrical and thermoelectric properties of tungsten trioxide (WO$_3$) thin films using the spray pyrolysis technique. Three samples, namely A$_1$, A$_2$, and A$_3$, were prepared by depositing the films…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
Monophasic and homogeneous Ni10Zr7 nanocrystalline alloy films were successfully grown at room temperature by co-sputtering in an indigenously developed three-gun DC/RF magnetron sputtering unit. The films could be produced with long-range…
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by…
Thin films of the superconductor YBa$_2$Cu$_3$O$_{7-\delta}$ (YBCO) were modified by low-energy light-ion irradiation employing collimated or focused He$^+$ beams, and the long-term stability of irradiation-induced defects was investigated.…
Transparent pure and Cu-doped (2.5, 5 and 10 at. %) anatase TiO2 thin films were grown by pulsed laser deposition technique on LaAlO3 substrates. The samples were structurally characterized by X-ray absorption spectroscopy and X-ray…
Thin films of the electron-doped infinite-layer cuprate superconductor Sr$_{1-x}$La$_x$CuO$_2$ (SLCO) with doping $x \approx 0.15$ were grown by means of pulsed laser deposition. (001)-oriented KTaO$_3$ and SrTiO$_3$ single crystals were…
Orientation, structure and morphology in the early growth stages of CuO films on strontium titanate were studied by synchrotron radiation X-ray diffraction. Nanostructured CuO films were obtained by ex situ heat treatment at 970 K in oxygen…
Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…
We present results on the development of nanocomposite NiO:Au thin-film hydrogen sensors, which are able to detect hydrogen concentrations as low as 2 ppm in air, operating at low temperatures in the range 125-150C. Thin NiO films were…
High-dielectric-constant CaCu3Ti4O12 (CCTO) thin films were prepared on Pt/Ti/SiO2/Si(100) substrates by pulsed-laser deposition. The 480 nm thick polycrystalline films have preferred orientation and show obvious crystallization on the…
A Li-Al-O thin film materials library, deposited by inert magnetron sputtering and post-deposition annealing in O2 atmosphere, was used to study the effects of different annealing temperatures (300 to 850{\deg}C) and durations (1 min to 7…
Thin films of magnesium doped zinc oxide (MZO) were synthesized using the sol gel method and annealed at different temperatures under ambient condition. The morphological properties of the post annealed MZO films were investigated using X…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…
A comparative study of the physical properties of undoped Zinc Oxide (ZnO) and Al doped Zinc Oxide (AZO) thin films were performed as a function of annealing temperature. The structural properties were analyzed using X-ray diffraction and…
We have grown and characterized 30 nm thick YBa$_2$Cu$_3$O$_{7-\delta}$ (YBCO) films, deposited by pulsed laser deposition on both MgO (110) and SrTiO$_3$ (001) substrates, which induce opposite strain to the superconducting layer. By…
This paper reveals the origin of variation in the magnitude and temperature dependence of the normal state resistivity frequently observed in different YBCO single crystal or thin film samples with the same $T_{c}$. We investigated…
An environmentally stable mesoscopic thin film of Au of certain thickness has been deposited thermally on top of a Ag+ implanted oxide substrate to develop a close to room temperature superconductor. This thin film has been deposited in two…
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by…
It was experimentally found that the evolution of dielectric loss with processing temperature displays a common trend in ferroelectric and dielectric thin oxide films: firstly an increase and then a decrease in dielectric loss when the…