Related papers: Conical Targets for Enhanced High-Current Positron…
The ILC positron system uses novel helical undulators to create a powerful photon beam from the main electron beam. This beam is passed through a titanium target to convert it into electron-positron pairs. The target is constructed as a 1 m…
It has been known since decades that the alignment of a beam of high-energy electrons with particular crystal directions involves a significant increase of bremsstrahlung radiation emission. This enhancement lies at the conceptual…
A photon-positron conversion target of the undulator or laser based polarized positron source is optimized using a modified GEANT-3 program adapted to count the spin transfer. High intensity positron beam with around 0.75 polarisation could…
In the baseline design of the International Linear Collider (ILC) an undulator-based source is foreseen for the positron source. In this study the energy deposition in the pulsed flux concentrator (FC) of positron source is calculated for…
The next generation of Petawatt-class lasers presents the opportunity to study positron production and acceleration experimentally, in an all-optical setting. Several configurations were proposed to produce and accelerate positrons in a…
Relativistic positron sources with high spin polarization have important applications in nuclear and particle physics and many frontier fields. However, it is challenging to produce dense polarized positrons. Here we present a simple and…
Slow positrons are increasingly important to the study of material surfaces. For these kinds of studies, the positrons must have low emittance and relatively high brightness. Unfortunately, fast positron sources like radioactive capsules or…
Positron beams, both polarized and non-polarized, low and high energy have a wide range of applications and many methods can be used to produce them. In this paper we analyse the two main methods used to produce positrons for accelerator…
Although the interaction of a flat-foil with currently available laser intensities is now considered a routine process, during the last decade emphasis is given to targets with complex geometries aiming on increasing the ion energy. This…
Measurements performed with the purpose of characterizing the charged secondary radiation for dose release monitoring in particle therapy are reported. Charged secondary yields, energy spectra and emission profiles produced in poly-methyl…
In order to achieve the physics goals of future Linear Colliders, it is important that electron and positron beams are polarized. The baseline design at the International Linear Collider (ILC) foresees an e+ source based on helical…
The paper presents recent results of a "point-like" neutron source development based on a D-D fusion in a D-loaded target caused by its bombardment with a sharply focused deuterium ion beam. These developments are undergoing at the…
It is known that the alignment of an high-energy e- beam with specific crystal directions leads to a significant increase of the coherent radiation emission. This enhancement can be exploited to create an intense photon source. An elective…
The P-cubed Target Insertion Device (P$^3$-TID) is a research instrument dedicated to test novel positron source target configurations inside of the proof-of-principle PSI Positron Production (P-cubed or P$^3$) experiment at the Paul…
Several designs for high-energy Lepton Colliders serving as Higgs factories but extendable to higher energies up to the TeV range are under discussion. The most mature design is the International Linear Collider (ILC), but also the Compact…
The interaction of a high-intensity ultrashort laser pulse with a few microns-thick hydrocarbon target is known to accelerate protons/ions to multi-MeV, on the rear side of the target, via the mechanism of target normal sheath acceleration.…
A source for polarized positron beams at the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab is being designed. The Polarized Electrons for Polarized Positrons (PEPPo) concept is used to produce polarized…
We propose a method for polarising antiprotons in a storage ring by means of a polarised positron beam moving parallel to the antiprotons. If the relative velocity is adjusted to $v/c \approx 0.002$ the cross section for spin-flip is as…
In this note, the tertiary particle yield from secondary targets of different materials placed at the 'filter' position of the H2 beam line of SPS North Area are presented. The production is studied for secondary beams of different momenta…
We present a conceptual design for a novel continuous wave electron-linac based high-intensity high-brightness slow-positron production source with a projected intensity on the order of 10$^{10}$ e$^+$/s. Reaching this intensity in our…