Related papers: Influence of the particle distribution on dust exp…
Dust explosions are among the most hazardous accidents affecting industrial facilities processing particulate solids. Describing the severity parameters of dust clouds is critical to the safety management and risk assessment of dust…
Determination of the explosion severity parameters of biomass is crucial for the safety management and dust explosion risk assessment of biomass-processing industries. These are commonly determined following experimental tests in the 20L…
The interactions between an incident shock and moderately dense particle curtain are simulated with the Eulerian-Lagrangian method. A customized solver based on OpenFOAM is extended with an improved drag model and collision model, and then…
We study interacting particle systems on the real line which generalize the Hammersley process [D. Aldous and P. Diaconis, Prob. Theory Relat. Fields 103, 199-213 (1995)]. Particles jump to the right to a randomly chosen point between their…
Using sedimentation to obtain precisely controlled packings of noncohesive spheres, we find that the volume fraction $\phi_{\rm RLP}$ of the loosest mechanically stable packing is in an operational sense well defined by a limit process.…
In the open circular billiard particles are placed initially with a uniform distribution in their positions inside a planar circular vesicle. They all have velocities of the same magnitude, whose initial directions are also uniformly…
The effect of introducing a spatial heterogeneity into an explosive medium is studied computationally by examining the detonation velocity near the limit to propagation in a thin explosive layer. The explosive system studied is an ideal gas…
To study the evolution of protoplanetary dust aggregates, we performed experiments with up to 2600 collisions between single, highly-porous dust aggregates and a solid plate. The dust aggregates consisted of spherical SiO$_2$ grains with…
In this article we report on a study of the near-wall dynamics of suspended colloidal hard spheres over a broad range of volume fractions. We present a thorough comparison of experimental data with predictions based on a virial…
Parker Solar Probe (PSP) counts dust impacts in the near-solar region, but modelling effort is needed to understand the dust population's properties. We aim to constrain the dust cloud's properties based on the flux observed by PSP. We…
We present experimental observations of the velocity and spatial distribution of inertial particles dispersed in the turbulent downward flow through a vertical channel at $Re_{\tau} = 235$ and $335$. The working fluid is air laden with…
An experimental investigation of the propagation characteristics of shock waves in an inhomogeneous dusty plasma is carried out in the Dusty Plasma Experimental (DPEx) device. A homogeneous dusty plasma, made up of poly-dispersive kaolin…
With a novel 3D discrete-element method specially developed with adhesive contact mechanics, random loose packings of uniform spherical micron-sized particles are fully investigated. The results show that large velocity, large size or weak…
Radiation pressure acting on gas and dust causes HII regions to have central densities that are lower than the density near the ionized boundary. HII regions in static equilibrium comprise a family of similarity solutions, parametrized by 3…
Microscopy research often requires recovering particle-size distributions in three dimensions from only a few (10 - 200) profile measurements in the section. This problem is especially relevant for petrographic and mineralogical studies,…
This study investigates the spatial distribution of inertial particles in turbulent Taylor-Couette flow. Direct numerical simulations are performed using a one-way coupled Eulerian-Lagrangian approach, with a fixed inner wall Reynolds…
The microstructure of coagulated colloidal particles, for which the inter-particle potential is described by the DLVO theory, is strongly influenced by the particles' surface potential. Depending on its value, the resulting microstructures…
When modeling the density and grain size distribution in debris disks, the minimum particle size is often significantly larger than the corresponding blowout size. While the dust particles are usually modeled as compact, homogenous spheres,…
Recent observations of brown dwarf spectroscopic variability in the infrared infer the presence of patchy cloud cover. This paper proposes a mechanism for producing inhomogeneous cloud coverage due to the depletion of cloud particles…
This study investigates the influence of particle morphology on spray characteristics in low-pressure cold gas spraying (LPCGS) by analyzing three copper powders with distinct shapes and microstructures. A comprehensive morphology analysis…