Related papers: Composition Effects on Ni/Al Reactive Multilayers:…
The mechanical characteristics of a monolithic (non-porous) crystalline or amorphous material are described by a well-defined set of quantities. It is possible to change the mechanical properties by introducing porosity into this material:…
The present study reports on the structure formation in thin epitaxial nickel-aluminum films (Ni1-xAlx; Al atomic fraction x up to x=0.24) grown on MgO(001) substrates by magnetron sputtering. Experimental and computational data demonstrate…
The microstructure, mechanical properties and thermal stability of AlTiN and AlTiBN coatings grown by reactive high-power impulse magnetron sputtering (HiPIMS) have been analyzed as a function of Al/(Al+Ti) ratio, x, between 0.5 and 0.8.…
High Nb-containing TiAl alloys exhibit exceptional high-temperature strength and room-temperature ductility, making them widely used in hot-section components of automotive and aerospace engines. However, the lack of accurate interatomic…
The early stage of the reactive interdiffusion in the Cu-Al system was investigated at 350 {\textdegree}C and 300 {\textdegree}C thanks to in-situ transmission electron microscopy. A special care was given to find conditions where the…
An equimolar NiCoFeCrGa high entropy alloy having dual-phase homogeneous components was studied, where the constituent phases exhibit distinct mechanical properties. Micropillars with various diameters were created from two differently heat…
The world's growing hunger for artificial cold on the one hand, and the ever more stringent climate targets on the other, pose an enormous challenge to mankind. Novel, efficient and environmentally friendly refrigeration technologies based…
Room and high temperature mechanical properties of reactive magnetron sputtered TaSiN coatings were measured using nanoindentation (between 25C and 500C). Fracture toughness was also evaluated at a similar temperature range using the…
Interfaces have long been known to be the key to many mechanical and electric properties. To nickel base superalloys which have perfect creep and fatigue properties and have been widely used as materials of turbine blades, interfaces…
High-pressure X-ray diffraction experiments were performed on Ti-Al-V alloys to investigate the effect of composition on structural stability, focusing on Ti-3Al-2.5V and comparing with pure Titanium and Ti-6Al-4V. Measurements using…
By using ab inito calculations within Density Functional Theory, we have explored the possible structures and various properties of porous AlN monolayer materials. Two kinds of porous AlN monolayer are identified, and the phonon dispersion…
Molecular-scale materials with bistable behavior and tunable properties are increasingly relevant for next-generation nanoscale electronic devices. Helical foldamers are promising candidates, but their structural and mechanical properties…
Niobium nitride (NbN) is a useful material for fabricating detectors because of its high critical temperature and relatively high kinetic inductance. In particular, NbN can be used to fabricate nanowire detectors and mm-wave transmission…
We study the structural properties and the collective microscopic dynamics of atoms in the amorphous metallic alloy $Ni_{33}Zr_{67}$ at the temperature $T=300K$ by molecular dynamics simulations. The calculated equilibrium structural and…
The mechanical properties of amorphous solids like metallic glasses can be dramatically changed by adding small concentrations (as low as 0.1\%) of foreign elements. The glass-forming-ability, the ductility, the yield stress and the elastic…
Experimental investigations on the effect of thicknesses on mixed-mode I/II fracture are performed with an aluminum alloy with thicknesses of 2, 4, 8 and 14 mm. It is found that under pure-mode I loading condition, the loading capacity per…
Surface alloying can alter surface electronic and magnetic properties, which are key parameters when developing new materials tailored for specific applications. A magnetic surface alloy was formed by depositing Sb on Ni(111) at elevated…
Liquid-metal infiltrated Cu30Mo70 (weigth percentage) is subjected to severe plastic deformation using high pressure torsion. The initially equiaxed dual phase structure is gradually transformed into a lamellar structure composed of…
Oxynitrides are used in a variety of applications including photocatalysts, high-k dielectrics or wear-resistant coatings and often show intriguing multi-functionality. To accelerate the co-optimization of the relevant material properties…
Recent advances in tools for crystal structure analysis enabled us to describe a new phenomenon in structural chemistry, which, to this day, has remained hidden. Here we describe a crystal structure with an incommensurate compositional…