Related papers: Split-gasket approach to the integration of electr…
When diamond anvil cell (DAC) sample chambers are outfitted with both thermal insulation and electrodes, two cutting-edge experimental methods are enabled: Joule heating with spectroradiometric temperature measurement, and electrical…
A plastic turnbuckle diamond anvil cell (DAC) and nonmetallic gasket have been developed for pulsed magnetic field studies to address issues of eddy current heating and Lorentz forces in metal cells. The plastic cell evolved from our 6.3 mm…
Extreme pressures and high magnetic fields can affect materials in profound and fascinating ways. However, large pressures and fields are often mutually incompatible; the rapidly changing fields provided by pulsed magnets induce eddy…
Diamond anvil cell using boron-doped metallic diamond electrodes covered with undoped diamond insulating layer have been developed for electrical transport measurements under high pressure. These designed diamonds were grown on a bottom…
A miniature opposed-anvil high-pressure cell has been developed for magnetic measurement in a commercial superconducting quantum interference device (SQUID) magnetometer. Non-magnetic anvils made of composite ceramic material were used to…
A novel diamond anvil cell suitable for electrical transport measurements under high pressure has been developed. A boron-doped metallic diamond film was deposited as an electrode onto a nano-polycrystalline diamond anvil using a microwave…
The high-pressure melting curves of metals provide simple and useful tests for theories of melting, as well as important constraints for the modeling of planetary interiors. Here, we present an experimental technique that reveals the latent…
Temperature and pressure are essential parameters in the synthesis, evaluation, and application of functional materials. This study proposes the addition of a heating function to a high-pressure diamond anvil cell (DAC) with in-situ…
We present a novel fabrication procedure to produce high-quality lift-off structures on diamond anvils extending from the culet down to the slanted facets. Feature sizes down to 500 nm are achieved through the use of a bi-layer resist stack…
Part I shows that quantitative measurements of heat capacity are theoretically possible inside diamond anvil cells via high-frequency Joule heating (100 kHz to 10 MHz), opening up the possibility of new methods to detect and characterize…
We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied…
Tuning the energy density of matter at high pressures gives rise to exotic and often unprecedented properties, e.g., structural transitions, insulator-metal transitions, valence fluctuations, topological order, and the emergence of…
The uniaxial compression design of the diamond anvil high pressure cell (DAC) necessitates the use of a soft pressure-transmitting medium (PTM) to minimize non-hydrostatic effects at significantly high pressures, and many such media are…
Decades of measurements of the thermophysical properties of hot metals show that pulsed Joule heating is an effective method to heat solid and liquid metals that are chemically reactive or difficult to contain. In order to extend such…
This work presents the development and testing of a novel radio-frequency (RF) gasket with a Lenz lens surface geometry for contactless measurements in diamond anvil cells (DACs). Conventional RF approaches, which fabricate the Lenz lens…
The advantage of Bridgman anvil pressure cells is their wide pressure range and the large number of wires which can be introduced into the pressure chamber. In these pressure cells soft solid pressure mediums like steatite are used. We have…
We review recent advances in diamond anvil cell development, focusing on the details of magnetic susceptibility techniques. We have developed and implemented highly sensitive technique that allowed observations of superconductivity using…
Double stage diamond anvil cells (DAC) of two designs have been assembled and tested. We used a standard symmetric DAC as a primary stage and CVD microanvils machined by a focused ion beam - as a second. We evaluated pressure, stress, and…
Hydrostatic pressure applied using diamond anvil cells (DAC) has been widely explored to modulate physical properties of materials by tuning their lattice degree of freedom. Independently, electrical field is able to tune the electronic…
Recent developments of the AC-calorimetric technique adapted for the needs of high pressure experiments are discussed. A semi-quantitative measurement of the specific heat with a Bridgman-type of pressure cell as well as a diamond anvil…