Related papers: Beamforming with Joint Phase and Time Array: Syste…
This paper studies the joint multicast beamforming and user scheduling problem, with the objective of minimizing total transmitting power across multiple channels by jointly assigning each user to appropriate channel and designing multicast…
Transmit beamforming is a versatile technique for signal transmission from an array of $N$ antennas to one or multiple users [1]. In wireless communications, the goal is to increase the signal power at the intended user and reduce…
The pinching-antenna system (PASS) reconstructs wireless channels through pinching beamforming, i.e., optimizing the activated locations of pinching antennas (PAs) along the waveguide. The aim of this article is to investigate the joint…
In pursuance of the unused spectrum in higher frequencies, millimeter wave (mmWave) bands have a pivotal role. However, the high path-loss and poor scattering associated with mmWave communications highlight the necessity of employing…
Phase-time arrays, which integrate phase shifters (PSs) and true-time delays (TTDs), have emerged as a cost-effective architecture for generating frequency-dependent rainbow beams in wideband sensing and localization. This paper proposes an…
In this letter, we propose a blockwise phase rotation-aided analog transmit beamforming (BPR-ATB) scheme to improve the spectral efficiency and the bit-error-rate (BER) performance in millimeter wave (mmWave) communication systems. Due to…
Millimeter wave (mmWave) systems will likely employ large antenna arrays at both the transmitters and receivers. A natural application of antenna arrays is simultaneous transmission to multiple users, which requires multi-user precoding at…
Polarimetric phased arrays (PPAs) enhance radar target detection and anti-jamming capabilities, but their conventional dual transmit/receive (T/R) channel architecture leads to high cost and system complexity. To address these limitations,…
Hybrid beamforming for Terahertz (THz) ultra-massive multiple-input multiple-output (UM-MIMO) systems is a promising technology for 6G space-air-ground integrated networks, which can overcome huge propagation loss and offer unprecedented…
In this paper, we propose a multi-beam non-orthogonal multiple access (NOMA) framework for hybrid millimeter wave (mmWave) systems. The proposed framework enables the use of a limited number of radio frequency (RF) chains in hybrid mmWave…
The optimal beamforming design for multi-user continuous aperture array (CAPA) systems is proposed. In contrast to conventional spatially discrete array (SPDA), the beamformer for CAPA is a continuous function rather than a discrete vector…
Millimeter-wave (mmWave) using conventional phased array (CPA) enables highly directional and fixed angular beamforming (FAB), therefore enhancing physical layer security (PLS) in the angular domain. However, as the eavesdropper is located…
Josephson parametric converters (JPCs) are superconducting devices capable of performing nondegenerate, three-wave mixing in the microwave domain without losses. One drawback limiting their use in scalable quantum architectures is the large…
Millimeter wave (mmWave) communication with large array gains is a key ingredient of next generation (5G) wireless networks. Effective communication in mmWaves usually depends on the knowledge of the channel. We refer to the problem of…
In the recent years constructing time-invariant spatial-focusing beampatterns by using frequency diverse arrays (FDAs) is conveyed in several papers. Further than time-invariant spatial-focusing beampatterns, the unfeasibility of…
The millimeter wave (mmWave) frequencies offer the potential for enormous capacity wireless links. However, designing robust communication systems at these frequencies requires that we understand the channel dynamics over both time and…
Fifth generation (5G) wireless networks are expected to utilize wide bandwidths available at millimeter wave (mmWave) frequencies for enhancing system throughput. However, the unfavorable channel conditions of mmWave links, e.g., higher…
The convergence of sensing and communication in the millimeter-wave (mmWave) and low terahertz (THz) bands has been envisioned as a promising technology, since it incorporates high-rate data transmission of hundreds of Gbps and mm-level…
Flexible antenna arrays (FAAs) can physically reshape their geometry to add new spatial degrees of freedom, whereas transmit beamforming adjusts the complex element weights to electronically steer and shape the array's radiation pattern,…
Employing large antenna arrays and utilizing large bandwidth have the potential of bringing very high data rates to future wireless communication systems. However, this brings the system into the near-field regime and also makes the…