Related papers: Stabilizing post-yielding behavior of a stretching…
This work integrates in-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in high carbon bearing steels. The presence of a kinematically metastable retained…
Zinc alloys have emerged as promising candidates for biodegradable materials due to their remarkable biocompatibility and favorable mechanical characteristics. The incorporation of alloying elements plays an essential role in advancing the…
Materials with an allotropic phase transformation can result in the formation of microstructures where grains have orientation relationships (ORs) determined by the transformation history. These microstructures influence the final material…
A discrete-to-continuum transformation to model 2-D discrete lattices as energetically equivalent 1-D continuum beams is developed. The study is initiated in a classical setting but results in a non-classical two-scale micropolar beam model…
This research study the sol/gel synthesis of lithium-doped barium stannate titanate BaTi0.89Sn0.11O3 (BTS11) and investigates how varying composition with lithium affect its structural, morphological, ferroelectric, optical, and electrical…
Architected materials achieve unique mechanical properties through precisely engineered microstructures that minimize material usage. However, a key challenge of low-density materials is balancing high stiffness with stable deformability up…
This paper reviews recent literature results on the mechanics of structures formed by layers of pentamode lattices alternating with stiffening plates, which can be effectively employed for the development of seismic isolation devices and…
The mechanisms that govern a previously unexplained hardening effect of a single phase Cu-30wt%Zn {\alpha}-brass after heating have been investigated. After cold-work, the alloy possesses an increased yield strength and hardening rate only…
When stressed sufficiently, solid materials yield and deform plastically via reorganization of microscopic constituents. Indeed, it is possible to alter the micro-structure of materials by judicious application of stress, an empirical pro-…
Energy absorbing materials, like foams used in protective equipment, are able to undergo large deformations under low stresses, reducing the incoming stress wave below an injury or damage threshold. They are typically effective in absorbing…
The High Nitrogen Martensitic Stainless Steel (HNMS) was subjected to three different austenitizing cycles of 1050$^\circ$C, 1075$^\circ$C and 1100$^\circ$C followed by subzero treatment at -70$^\circ$C. The fraction of retained austenite…
We use synchrotron x-ray diffraction and electrical transport under pressure to probe both the magnetism and the structure of single crystal NiS2 across its Mott-Hubbard transition. In the insulator, the low-temperature antiferromagnetic…
A micromechanical model based on the theory of elasticity has been developed to study the configuration of self-assembled impurity nanostructures in high temperature superconducting YBCO films. With the calculated equilibrium strain and…
Superlattice (SL) thin films composed of refractory ceramics unite extremely high hardness and enhanced fracture toughness; a material combination often being mutually exclusive. While the hardness enhancement obtained whentwo materials…
Zinc alloys are recognised for their excellent biocompatibility and favourable corrosion rates, making them suitable for bioabsorbable implants. However, their mechanical properties necessitate improvement to fulfil the rigorous…
Microstructure-property relationships of resistance spot welded 6061-T6 aluminum alloy lap joints were investigated via mechanical testing and microscopy techniques. Quasi-static tensile and novel shear punch tests were employed to measure…
In nature, materials such as ferroelastics and multiferroics can switch their microstructure in response to external stimuli, and this reconfiguration causes a simultaneous modulation of its material properties. Rapid prototyping…
This paper introduces the chain lattice, a hierarchical truss structure comprising two interpenetrating lattices. One lattice toughens the material and prevents catastrophic localized failure while the other lattice serves as a porous…
The self-assembly of binary nanoparticle superlattices from colloidal mixtures is a promising method for the fabrication of complex colloidal co-crystal structures. However, binary mixtures often form amorphous or metastable phases instead…
A novel medium manganese steel named Novalloy with composition Fe-8.3Mn-3.8Al-1.8Si-0.5C-0.06V-0.05Sn was developed and thermomechanically processed through hot rolling and intercritical annealing. The steel possessed a yield strength of 1…