Related papers: Rubber wear on concrete: dry and in-water conditio…
We study the wear rate (mass loss per unit sliding distance) of a tire tread rubber compound sliding on concrete paver surfaces under dry and wet conditions, at different nominal contact pressures of $\sigma_0 = 0.12$, $0.29$, and $0.43 \…
This paper presents a comprehensive review of wear mechanisms, with a primary focus on rubber wear under sliding conditions. Beginning with classical wear theories, including the Archard and Rabinowicz models, we analyze their applicability…
Rubber friction on wet rough substrates at low velocities is typically 20-30% smaller than for the corresponding dry surfaces. We show that this cannot be due to hydrodynamics and propose a novel explanation based on a sealing effect…
We present experimental wear data for polymethyl methacrylate (PMMA) sliding on tile, sandpaper, and polished steel surfaces, as well as for soda-lime, borosilicate, and quartz glass sliding on sandpaper. The results are compared with a…
In rubber friction studies it is often observed that the kinetic friction coefficient {\mu} depends on the nominal contact pressure p. We discuss several possible origins of the pressure dependency of {\mu}: (a) saturation of the contact…
We study rubber sliding friction on hard lubricated surfaces. We show that even if the hard surface appears smooth to the naked eye, it may exhibit short wavelength roughness, which may give the dominant contribution to rubber friction.…
We present a study of sliding friction for rigid triangular steel sliders on soft rubber substrates under both lubricated and dry conditions. For rubber surfaces lubricated with a thin film of silicone oil, the measured sliding friction at…
Surface roughness is a key factor when it comes to friction and wear, as well as to other physical properties. These phenomena are controlled by mechanisms acting at small scales, in which the topography of apparently-flat surfaces is…
We study the influence of the surface energy and contamination films on rubber adhesion and sliding friction. We find that there is a transfer of molecules from the rubber to the substrate which reduces the work of adhesion and makes the…
Machine elements and mechanical components have often surfaces with anisotropic roughness, which may result from the machining processes, e.g. grinding, or from wear. Hence, it is important to understand how surface roughness anisotropy…
This paper reports on the frictional properties of smooth rubber substrates sliding against rigid surfaces covered with various densities of colloidal nano-particles (average diameter 77 nm). Friction experiments were carried out using a…
We study the sliding friction for viscoelastic solids, e.g., rubber, on hard flat substrate surfaces. We consider first the fluctuating shear stress inside a viscoelastic solid which results from the thermal motion of the atoms or molecules…
Rubber friction is of major practical importance in applications such as tires, rubber seals, and footwear. This review article focuses on the theory and experimental studies of rubber friction on substrates with random roughness. We…
Loss of braking power and rubber skidding on a wet road is still an open physics problem, since neither the hydrodynamical effects nor the loss of surface adhesion that are sometimes blamed really manage to explain the 20-30% observed loss…
In order to develop predictive wear laws, relevant material parameters and their influence on the wear rate need to be identified. Despite decades of research, there is no agreement on the mathematical form of wear equations and even the…
We generalize the Persson contact mechanics and rubber friction theory to the case where both surfaces have surface roughness. The solids can be rigid, elastic or viscoelastic, and can be homogeneous or layered. We calculate the contact…
A huge number of technological and biological systems involves the lubricated contact between rough surfaces of soft solids in relative accelerated motion. Examples include dynamical rubber seals and the human joints. In this study we…
We report a dynamical-mechanical study of stress relaxation at small deformation in a natural (polyisoprene) rubber well above its glass transition temperature Tg. We find that an almost complete relaxation of stress takes place over very…
Surface temperature is among crucial factors, which control wear during sliding dry contact. Using computer modeling, we study the possibility to achieve close to zero rate of surface wear during sliding friction of the special type of…
We investigate theoretically the possibility of a wetting transition induced by geometric roughness of a solid substrate for the case where the flat substrate does not show a wetting layer. Our approach makes use of a novel closed-form…