Related papers: Practical Modulo Sampling: Mitigating High-Frequen…
Photonic analog to digital conversion offers promise to overcome the signal-to-noise ratio (SNR) and sample rate trade-off in conventional analog to digital converters (ADCs), critical for modern digital communications and signal analysis.…
As technology grows, higher frequency signals are required to be processed in various applications. In order to digitize such signals, conventional analog to digital convertors are facing implementation challenges due to the higher sampling…
Accurate and efficient wave-optics simulation of partially coherent light transport systems is critical for the design of advanced optical systems, ranging from computational lithography to diffraction-limited storage rings (DLSR). However,…
The random demodulator is a recent compressive sensing architecture providing efficient sub-Nyquist sampling of sparse band-limited signals. The compressive sensing paradigm requires an accurate model of the analog front-end to enable…
In general, real world signals are analog in nature. To capture these signals for further processing, or transmission, signals are converted into digital bits using analog-to-digital converter (ADC). In this conversion, a good amount of…
Network-assisted full-duplex (NAFD) distributed massive multiple input multiple output (M-MIMO) enables the in-band full-duplex with existing half-duplex devices at the network level, which exceptionally improves spectral efficiency. This…
Periodic nonuniform sampling is a known method to sample spectrally sparse signals below the Nyquist rate. This strategy relies on the implicit assumption that the individual samplers are exposed to the entire frequency range. This…
This paper describes a pipelined analog-to-digital converter (ADC) employing a power and area efficient architecture. The adjacent stages of a pipeline share operational amplifiers. In order to keep accuracy of the amplifiers in the first…
The characterization of laboratory plasma instabilities, magnetic reconnection and turbulence associated phenomena, require the simultaneous signal sampling from arrays of magnetic sensors (hundreds or even thousands) to obtain spatial…
This paper proposes a novel approach that employs error amplification and ADC-based dual-mixer time-difference (ADC-based-DMTD) technique for high-precision locking of laser repetition frequency with compact size. This electronic system…
Data acquisition is an important process in the functioning of any control system. Usually, the acquired signal is analogic, representing a continuous physical measure, and it should be processed in a digital system based on an analog to…
The use of low-resolution analog-to-digital converters (ADCs) can significantly reduce power consumption and hardware cost. However, their resulting severe nonlinear distortion makes reliable data transmission challenging. For orthogonal…
In this paper, we propose and evaluate two novel double-sequence low-resolution frequency synchronization methods in millimeter-wave (mmWave) systems. In our system model, the base station uses analog beams to send the synchronization…
Hybrid analog-digital precoding architectures and low-resolution analog-to-digital converter (ADC) receivers are two solutions to reduce hardware cost and power consumption for millimeter wave (mmWave) multiple-input multiple-output (MIMO)…
Quantizers play a critical role in digital signal processing systems. Recent works have shown that the performance of quantization systems acquiring multiple analog signals using scalar analog-to-digital converters (ADCs) can be…
In order to solve the problems of waveform distortion and signal delay by many physical and electrical systems with linear low-pass transfer characteristics with multiple complex poles, a general digital-signal-processing (DSP)-based method…
High data rates require vast bandwidths, that can be found in the sub-THz band, and high sampling frequencies, which are predicted to lead to a problematically high analog-to-digital converter (ADC) power consumption. It was proposed to use…
Analog to digital converters (ADCs) are a major contributor to the power consumption of multiple-input multiple-output (MIMO) receivers in large bandwidth millimeter-wave systems. Prior works have considered two mitigating solutions to…
Sampling theories lie at the heart of signal processing devices and communication systems. To accommodate high operating rates while retaining low computational cost, efficient analog-to digital (ADC) converters must be developed. Many of…
This paper considers channel estimation and uplink achievable rate of the coarsely quantized massive multiple-input multiple-output (MIMO) system with radio frequency (RF) impairments. We utilize additive quantization noise model (AQNM) and…