Related papers: Stress-induced phase transformations in Ti-15Mo al…
The changes of magnetic properties upon heat treatment of a metastable supersaturated solid solution processed by severe plastic deformation are investigated by in-situ AC-hysteresis measurements. Data are analyzed in the framework of…
We report in situ measurements of stress evolution in a silicon thin-film electrode during electrochemical lithiation and delithiation by using the Multi-beam Optical Sensor (MOS) technique. Upon lithiation, due to substrate constraint, the…
Multiphase titanium alloys are critical materials in high value engineering components, for instance in aero engines. Microstructural complexity is exploited through interface engineering during mechanical processing to realise significant…
Results of X-ray diffraction experiments on solid oxygen at low temperature and at pressures up to 10 GPa are presented.A careful sample preparation and annealing around 240 K allowed to obtain very good diffraction patterns in the…
We fabricated superconducting FeSe wires by the chemical-transformation PIT process. The obvious correlation between annealing temperature and phase transformation was observed. Annealing above 500^{\circ}C produced wire-core transformation…
The brittleness of an aluminide diffusion coating protecting a Ren\'e 125 Ni-based polycrystalline superalloy was investigated over a wide range of temperatures in its as-received and thermally aged form. Isothermal and thermal cycled aging…
This paper reveals the origin of variation in the magnitude and temperature dependence of the normal state resistivity frequently observed in different YBCO single crystal or thin film samples with the same $T_{c}$. We investigated…
A redistribution of Cr atoms related to a phase decomposition (PD) caused by an isothermal annealing at 415 C in a 15.15 at%Cr Fe-Cr alloy was studied in an ex-situ way by the conversion electrons M\"ossbauer spectroscopy. Analysis of the…
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by…
In this work, the effects of thermal annealing at 500 {\deg}C on aerosol-deposited $0.65\text{Pb}(\text{Mg}_{1/3}\text{Nb}_{2/3})\text{O}_{3}-0.35\text{PbTiO}_{3}$ thick films on stainless-steel substrates are investigated using two…
We investigated the effects of annealing temperatures (TA) on a Pd (5 nm)/CoFeB (10 nm)/Pd (3 nm)/Ta (10 nm) multilayer structure. The as-deposited sample showed an amorphous state with in-plane uniaxial magnetic anisotropy (UMA), resulting…
Glasses encode the memory of any thermo-mechanical treatment applied to them. This ability is associated to the existence of a myriad of metastable amorphous states which can be probed through different experimental pathways. It is usually…
Reactive single-step hot-pressing at 1473 K and 35 MPa for 4 h produces dense, bulk, near single-phase, low-cost and low-criticality Fe$_2$Al$_{1.15}$B$_2$ and Fe$_2$Al$_{1.1}$B$_2$Ge$_{0.05}$Ga$_{0.05}$ MAB samples, showing a second-order…
Creep deformation behaviour in single phase $\gamma$-TiAl alloy has been an extensively studied topic since the late 1970s. A lot of literatures have reported creep behaviour of $\gamma$-TiAl alloys, manufactured using different processing…
We provide a critical atomistic evidence of pseudoelastic behavior in complex solid-solution BCC Mo-W-Ta-Ti-Zr alloy. Prior to this work, only limited single-crystal BCC solids of pure metals and quaternary alloys have shown pseudoelastic…
tructural transformation, pressure dependent elasticity behaviors, phonon, and thermodynamic properties of the equiatomic TiZr alloy are investigated by using first-principles density-functional theory. Our calculated lattice parameters and…
Pressure-induced transitions from ordered intermetallic phases to substitutional alloys to semi-ordered phases were studied in a series of bismuth tellurides. Using angle-dispersive x-ray diffraction, the compounds Bi4Te5, BiTe, and Bi2Te…
The influence of static stress and alternating loading direction on the potential energy and mechanical properties of amorphous alloys is investigated using molecular dynamics simulations. The model glass is represented via a binary mixture…
In a previous work a model was proposed for the phase transitions of crystals with localized magnetic moments which at low temperature have a "conical" arrangement that at higher T transforms into a more symmetrical structure (depending on…
We present results from ramp compression experiments on high-purity Zr that show the $\alpha \rightarrow \omega$, $\omega \rightarrow \beta$, as well as reverse $\beta \rightarrow \omega$ phase transitions. Simulations with a multi-phase…