Related papers: Beam Structured Turbo Receiver for HF Skywave Mass…
Transmit beamforming (Tx-BF) for multiple-input multiple-output (MIMO) channels is an effective means to improve system performance. In frequency-selective channels, Tx-BF can be implemented in combination with single-carrier…
Future generations of cellular systems presume to use an extremely high number of antennas to enable mm waves. Increasing the number of antennas requires a growth in connections between a remote radio head (RRH) and a baseband unit (BBU).…
User-centric (UC) based cell-free (CF) structures can provide the benefits of coverage enhancement for millimeter wave (mmWave) multiple input multiple output (MIMO) systems, which is regarded as the key technology of the reliable and…
Massive multiple-input multiple-out (MIMO) technology is vital in millimeter-wave (mmWave) bands to obtain large array gains. However, there are practical challenges, such as high hardware cost and power consumption in such systems. A…
Employing large antenna arrays is a key characteristic of millimeter wave (mmWave) and terahertz communication systems. However, due to the adoption of fully analog or hybrid analog/digital architectures, as well as non-ideal hardware or…
We present an architecture for scaling digital beamforming for wideband massive MIMO radar. Conventional spatial processing becomes computationally prohibitive as array size grows; for example, the computational complexity of MVDR…
Filter bank-based multicarrier (FBMC) systems have attracted increasing attention recently in view of their many advantages over the classical cyclic prefix (CP)-based orthogonal frequency division multiplexing (CP-OFDM) modulation.…
As communication systems that employ millimeter wave (mmWave) frequency bands must use large antenna arrays to overcome the severe propagation loss of mmWave signals, hybrid beamforming has been considered as an integral component of mmWave…
In this paper, the problem of joint design of Spectrum Sensing (SS) and receive beamforming (BF), with reference to a Cognitive Radio (CR) system, is considered. The aim of the proposed design is the maximization of the achievable average…
Millimeter wave multiple-input multiple-output (mmWave-MIMO) systems with small number of radio-frequency (RF) chains have limited multiplexing gain. Spatial path index modulation (SPIM) is helpful in improving this gain by utilizing…
Millimeter wave (mmWave) band, or high frequencies such as THz, has large undeveloped band of spectrum. However, wireless channels over the mmWave band usually have one or two paths only due to the severe attenuation. The channel property…
This thesis considers channel estimation and multiuser (MU) data transmission for massive MIMO systems with fully digital/hybrid structures in mmWave channels. It contains three main contributions. In this thesis, we first propose a…
The revolutionary technology of \emph{Stacked Intelligent Metasurfaces (SIM)} has been recently shown to be capable of carrying out advanced signal processing directly in the native electromagnetic (EM) wave domain. An SIM is fabricated by…
As a next-generation wireless technology, the in-band full-duplex (IBFD) transmission enables simultaneous transmission and reception of signals over the same frequency, thereby doubling spectral efficiency. Further, a continuous up-scaling…
Millimeter-wave massive MIMO with lens antenna array can considerably reduce the number of required radio-frequency (RF) chains by beam selection. However, beam selection requires the base station to acquire the accurate information of…
Massive multiple-input multiple-output (MIMO) is a fundamental enabler to provide high data throughput in next generation cellular networks. By equipping the base stations (BSs) with tens or hundreds of antenna elements, narrow and high…
Hybrid beamforming is widely recognized as an important technique for millimeter wave (mmWave) multiple input multiple output (MIMO) systems. Generalized spatial modulation (GSM) is further introduced to improve the spectrum efficiency.…
Hybrid beamforming (HB) architectures are attractive for wireless communication systems with large antenna arrays because the analog beamforming stage can significantly reduce the number of RF transceivers and hence power consumption. In HB…
Optimal data detection in massive multiple-input multiple-output (MIMO) systems requires prohibitive computational complexity. A variety of detection algorithms have been proposed in the literature, offering different trade-offs between…
Training beam design for channel estimation with infinite-resolution and low-resolution phase shifters (PSs) in hybrid analog-digital milimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems is considered in this paper.…