Related papers: Microscale deformation of intermetallic-Mg interfa…
We investigate the roughening of shear cracks running along the interface between a thin film and a rigid substrate. We demonstrate that short-range correlated fluctuations of the interface strength lead to self-affine roughening of the…
Experimental investigations on the effect of thicknesses on mixed-mode I/II fracture are performed with an aluminum alloy with thicknesses of 2, 4, 8 and 14 mm. It is found that under pure-mode I loading condition, the loading capacity per…
The mechanical properties and deformation mechanisms of Cu/Nb nanoscale metallic multilayers (NMMs) manufactured by accumulative roll bonding (ARB) are studied at 25C and 400C. Cu/Nb NMMs with individual layer thicknesses between 7 and 63…
A simulation strategy based in the finite element model was developed to model the corrosion and mechanical properties of biodegradable Mg scaffolds manufactured by laser power bed fusion after immersion in simulated body fluid. Corrosion…
This study investigates thermal transport across nanocrystalline diamond/AlGaN interfaces, crucial for enhancing thermal management in AlGaN/AlGaN-based devices. Chemical vapor deposition growth of diamond directly on AlGaN resulted in a…
In this work the global and local mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy are investigated by a combination of different testing and characterization techniques in order to shed light on the partly…
The molecular mechanism of slip at the interface between polymer melts and weakly attractive smooth surfaces is investigated using molecular dynamics simulations. In agreement with our previous studies on slip flow of shear-thinning fluids,…
Dislocations in ceramics have recently gained renewed research interest, in contrast to the traditional belief that ceramics are inherently brittle. Understanding dislocation mechanics in representative oxides is beneficial for effective…
Understanding rapid solidification behavior at velocities relevant to additive manufacturing (AM) is critical to controlling microstructure selection. Although in-situ visualization of solidification dynamics is now possible, systematic…
Magnesium (Mg) and its alloys hold great potential as an energy-saving structural material for automative, aerospace applications. However, the use of Mg alloys has been limited due to poor ductility and formability. Poor mechanical…
We present a single, unified, multi-scale model to study the attachment\detachment dynamics of two deforming, near spherical cells, coated with binding ligands and subject to a slow, homogeneous shear flow in a viscous fluid medium. The…
Microstructure-property relationships of resistance spot welded 6061-T6 aluminum alloy lap joints were investigated via mechanical testing and microscopy techniques. Quasi-static tensile and novel shear punch tests were employed to measure…
Ion thruster is a revolution technology with potential applications in space mission but the thrusters operation lifetime is limited by the sputtering from thruster components. In this work, molecular dynamic simulations are performed to…
Metastable superconductivity at 39 - 54 K in the interfaces formed by metallic and oxidized magnesium (MgO) has been observed by ac magnetic susceptibility measurements. The superconducting interfaces have been produced by the surface…
The rupture of the interface joining two materials under frictional contact controls their macroscopic sliding. Interface rupture dynamics depend markedly on the mechanical properties of the bulk materials that bound the frictional…
The rheology of granular materials near an interface is investigated through proton magnetic resonance imaging. A new cylinder shear apparatus has been inserted in the MRI device, which allows the control of the radial confining pressure…
Short and long-term stabilities of cementless implants are strongly determined by the interfacial load transfer between implants and bone tissue. Stress-shielding effects arise from shear stresses due to the difference of material…
A phase-field model is developed to simulate the corrosion of Mg alloys in body fluids. The model incorporates both Mg dissolution and the transport of Mg ions in solution, naturally predicting the transition from activation-controlled to…
Magnetic properties of electrical steel are usually measured on Single Sheet Testers, Epstein frames or ring cores. Due to the geometric dimensions and measurement principles of these standardized setups, the fundamental microstructural…
The semiconductor-metal junction is one of the most critical factors for high performance electronic devices. In two-dimensional (2D) semiconductor devices, minimizing the voltage drop at this junction is particularly challenging and…