Related papers: Femtosecond laser carbonization of polystyrene
Nonlinear absorption of femtosecond laser pulses provides a unique opportunity to confine energy deposition in any medium to a region that is below the focal diameter of a pulse. Illumination of a polymer film through a transparent high…
Surfaces covered with nanostructures, such as nanowire arrays, have shown to facilitate a significantly higher absorption of laser energy as compared to flat surfaces. Due to the efficient coupling of the laser energy, highly energetic…
We report a novel, polarization dependent, femtosecond laser-induced modification of surface nanostructures of indium, gallium, and arsenic grown on silicon via molecular beam epitaxy, yielding shape control from linear and circular…
By using femtosecond laser pulses at a wavelength range from 720 to 780 nm, we have observed absorptive and refractive nonlinearities in a film of multi-walled carbon nanotubes grown mainly along the direction perpendicular to the surface…
Effect of the femtosecond and nanosecond UV laser irradiation (below the ablation threshold) of graphite-like hexagonal boron nitride (hBN) has been studied. Experiments were carried out with the compacted powder under high vacuum at room…
We demonstrate that thousands of periodic nano-craters are fabricated on a subwavelength-diameter tapered optical fiber, an optical nanofiber, by irradiating with just a single femtosecond laser pulse. A key aspect of the fabrication is…
Laser processing of graphene is of great interest for cutting, patterning and structural engineering purposes. Tunable nanosecond lasers have the advantage of being relatively widespread (compared to e.g. femtosecond or high-power…
The effect of femtosecond laser irradiation on bulk and single-layer MoS2 on silicon oxide is studied. Optical, Field Emission Scanning Electron Microscopy (FESEM) and Raman microscopies were used to quantify the damage. The intensity of…
The femtosecond laser filamentation is the result of the dynamic interplay between plasma self-focusing and defocusing generated by the multiphoton/tunnel ionization of air molecules. This equilibrium allows the filament to stably propagate…
We report on picosecond UV-laser processing of hexagonal boron nitride (hBN) at moderately high pressures above 500 bar. The main effect is specific to the ambient gas and laser pulse duration in the ablation regime: when samples are…
We synthesize macroscopically long linear carbon chains (carbynes) in a colloidal solution, then deposit them on a surface. The method is based on the formation of carbon threads by laser ablation in a colloid accompanied by the…
Singly ionized nitrogen molecules in ambient air pumped by near-infrared femtosecond laser give rise to superradiant emission. Here we demonstrate coherent control of this superradiance by injecting a pair of resonant seeding pulses inside…
Using fully three-dimensional particle-in-cell simulations, we show that readily available femtosecond laser systems can stably generate proton beams with hundred MeV energy and low spread at $\sim1\%$ level by parallel irradiation of a…
The formation and properties of laser-induced periodic surface structures (LIPSS) were investigated on carbon fibers under irradiation of fs-laser pulses characterized by a pulse duration $\tau$ = 300 fs and a laser wavelength $\lambda$ =…
The employment of ultrashort laser sources at the mid-IR spectral region for transparent materials is designed to open new routes for laser patterning and a wealth of exciting applications in optics and photonics. To elucidate the material…
It is very challenging to achieve near perfect absorption/emission that is both broadband and omnidirectional while utilizing a scalable fabrication process. Femtosecond laser surface processing is an emerging low-cost and large-scale…
Multiphoton microscopy has enabled us to image cellular dynamics in vivo. However, the excitation wavelength for imaging with commercially available lasers is mostly limited between 650-1040 nm. Here we develop a femtosecond fiber laser…
Femtosecond laser ablation has been demonstrated to be a versatile tool to produce micro/nanoscale features with high precision and accuracy. However, the use of high laser fluence to increase the ablation efficiency usually results in…
Phase noise is very important for the ultrafast pulse application in telecommunication, ultrafast diagnose, material science, and biology. In this paper, two types of carbon nano-materials, single-wall carbon nanotube and graphene oxide,…
Plasmonic metal nanostructures are an integral part of nanophotonic device applications owing to their ability to generate strong localized electromagnetic fields when illuminated from the far-field. These nanostructures can be prepared in…