Related papers: Microstructural evolution of Carrara marble during…
Strain hardening is a key feature observed in many rocks deformed in the so-called ``semi-brittle'' regime, where both crystal plastic and brittle deformation mechanisms operate. Dislocation storage has long been recognised as a major…
We study the role of grain size in the rheological behaviour of calcite aggregates in the semi-brittle regime. We conduct triaxial deformation tests on three rocks, Solnhofen limestone, Carrara marble and Wombeyan marble, with average grain…
The mechanisms that govern a previously unexplained hardening effect of a single phase Cu-30wt%Zn {\alpha}-brass after heating have been investigated. After cold-work, the alloy possesses an increased yield strength and hardening rate only…
Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…
The scope of this study is to understand the strength behaviour and fragment size of rocks during indirect, quasi-static, and dynamic tensile tests. Four rocks with different lithological characteristics namely, basalt, granite, sandstone…
The relationship between acoustic parameters and the microstructure of a Cu30Zn brass plate subjected to plastic deformation was evaluated. The plate, previously annealed at 550 {\deg}C for 30 minutes, was cold rolled to reductions in the…
The deformation behavior of single crystal and nanocrystalline nickel were studied using in situ micropillar compression experiments from quasi-static to high strain rates up to 10^3 s-1. Deformation occurred by dislocation slip activity in…
A coarse-grained molecular dynamics model of linear polyethylene-like polymer chain system was built to investigate the responds of structure and mechanical properties during uniaxial deformation. The influence of chain length, temperature,…
To examine the microstructural evolution that occurs during transient creep, we deformed olivine aggregates to different strains that spanned the initial transient deformation. Two sets of samples with different initial grain sizes of 5…
The mechanical behaviour of many materials, including polymers or natural materials, significantly depends on the rate of deformation. As a consequence, a rate-dependent ductile-to-brittle fracture transition may be observed. For…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
Friction and wear of metals are critically influenced by the microstructures of the bodies constituting the tribological contact. Understanding the microstructural evolution taking place over the lifetime of a tribological system therefore…
Atomistic deformation simulations in the nominally elastic regime are performed for a model binary glass with strain rates as low as $10^{4}$/sec (corresponding to 0.01 shear strain per 1$\mu$sec). A robust elasticity is revealed that…
The mechanical properties of crystalline materials can be substantially modified under confinement. Such modified macroscopic properties are usually governed by the altered microstructures and internal stress fields. Here, we use a parallel…
When a crystalline solid such as iron is cooled across a structural transition, its final microstructure depends sensitively on the cooling rate. For instance, an adiabatic cooling across the transition results in an equilibrium `ferrite',…
The deformation kinetics for glassy polymers confined in microscopic domain at very low temperature regime was investigated using a transition-rate-state dependent model considering the shear thinning behavior which means, once material…
Electronic states under pressure exhibit unconventional spin and charge dynamics that provide a powerful route to uncover exotic phases in quantum materials. Here, we present the structural, magnetic, and electronic evolution of…
The statistical theory of flow stress, including yield strength, for polycrystalline materials under quasi-static plastic deformation suggested in [arxiv:1803.08247[cond-mat.mtr-sci], arxiv:1805.08623[cond-mat.mtr-sci]] is developed in the…
A 10 wt.% nickel-steel has been developed for high pressures and low-temperature applications, due to its high strength, excellent toughness, and low ductile-to-brittle transition temperature (DBTT). Under dynamic loading conditions this…
Built on the tenets of rational thermodynamics, this article proposes a theory of strain gradient thermo-visco-plasticity for isotropic polycrystalline materials under high strain rates. The effect of micro-inertia, which arises due to…