Related papers: Continuous Eddy Simulation (CES): Conceptual appro…
The purpose of this work is to investigate the flow around a fixed NACA0012 airfoil profile at different angles of attack using wall-resolved LES. The profile has a chord length of c=0.1 m and is exposed to a flow at a Reynolds number of…
Despite their well-known limitations, Reynolds-Averaged Navier-Stokes (RANS) models are still the workhorse tools for turbulent flow simulations in today's engineering application. For many practical flows, the turbulence models are by far…
We present large-eddy simulations (LESs) of riverine flow in a study reach in the Sacramento River, California. The riverbed bathymetry was surveyed in high-resolution using a multibeam echosounder to construct the computational model of…
This article proposes a Reynolds number scaling of the required grid points to perform wall-modeled LES of turbulent flows encountering separation off a solid surface. Based on comparisons between the various time scales in a…
Computational fluid dynamics models based on Reynolds-averaged Navier--Stokes equations with turbulence closures still play important roles in engineering design and analysis. However, the development of turbulence models has been stagnant…
In typical nature and engineering scenarios, such as supernova explosion and inertial confinement fusion, mixing flows induced by hydrodynamics interfacial instabilities are essentially compressible. Despite their significance, accurate…
The logarithmic law for the mean velocity in turbulent boundary layers has long provided a valuable and robust reference for comparison with theories, models, and large-eddy simulations (LES) of wall-bounded turbulence. More recently,…
We present a numerical method for Large Eddy Simulations (LES) of compressible two-phase flows. The method is validated for the flow in a micro channel with a step-like restriction. This setup is representative for typical cavitating…
A novel approach to wall modeling for the incompressible Navier-Stokes equations including flows of moderate and large Reynolds numbers is presented. The basic idea is that a problem-tailored function space allows prediction of turbulent…
Traditional Reynolds-averaged Navier-Stokes (RANS) closures, based on the Boussinesq eddy viscosity hypothesis and calibrated on canonical flows, often yield inaccurate predictions of both mean flow and turbulence statistics. Here, we…
We introduce CaLES, a GPU-accelerated finite-difference solver designed for large-eddy simulations (LES) of incompressible wall-bounded flows in massively parallel environments. Built upon the existing direct numerical simulation (DNS)…
Flow past a high-lift low-pressure turbine (LPT) blade in a cascade could be quite complex as phenomena like separation and transition are often involved. For a highly loadedT106A blade at a high incidence and relatively low Reynolds…
The dynamic model for large-eddy simulation (LES) of turbulent flows requires test filtering the resolved velocity fields in order to determine model coefficients. However, test filtering is costly to perform in large-eddy simulation of…
The Reynolds Averaged Navier Stokes (RANS) models are the most common form of model in turbulence simulations. They are used to calculate Reynolds stress tensor and give robust results for engineering flows. But RANS model predictions have…
Computationally resolving turbulence remains a central challenge in fluid dynamics due to its multi-scale interactions. Fully resolving large-scale turbulence through direct numerical simulation (DNS) is computationally prohibitive,…
In this paper, we have used renormalized viscosity for performing large eddy simulations (LES) of decaying homogeneous and isotropic turbulence inside a periodic cube on coarse grids ($32^3$, $64^3$ and $128^3$) at initial Taylor Reynolds…
A Finite-Volume based POD-Galerkin reduced order modeling strategy for steady-state Reynolds averaged Navier--Stokes (RANS) simulation is extended for low-Prandtl number flow. The reduced order model is based on a full order model for which…
The Reynolds-Averaged Navier-Stokes (RANS) approach remains a backbone for turbulence modeling due to its high cost-effectiveness. Its accuracy is largely based on a reliable Reynolds stress anisotropy tensor closure model. There has been…
In this paper, investigations are conducted using Reynolds-averaged Navier-Stokes (RANS) turbulence models to investigate the importance of turbulence modelling for nasal inspiration at a constant flow rate of 250 ml/s. Four different,…
Large-eddy simulations (LES) of a planar turbulent lean hydrogen-air jet flame at Re = 11000 are performed using a tabulated flamelet model based on mixture-averaged diffusion that incorporates detailed transport, including differential and…