Related papers: The perfomance of generalized Davies-Cotton optica…
Adaptive optics (AO) offers an opportunity to stabilize an image and maximize the spatial resolution achievable by ground based telescopes by removing the distortions due to the atmosphere. Typically, the deformable mirror in an AO system…
A perfect focus telescope is one in which all rays parallel to the axis meet at a point and give equal magnification there. It is shown that these two conditions define the shapes of both primary and secondary mirrors. Apart from scale, the…
Optical beams and starlight distorted by atmospheric turbulence can be corrected with adaptive optics systems to enable efficient coupling into single-mode fibers. Deformable mirrors, used to flatten the wavefront in astronomical…
A new optical design concept of telescopes to provide an aberration-free, wide field, unvignetted flat focal plane is described. The system employs three aspheric mirrors to remove aberrations, and provides a semi-circular field of view…
High-contrast imaging and spectroscopy provide unique constraints for exoplanet formation models as well as for planetary atmosphere models. Instrumentation techniques in this field have greatly improved over the last two decades, with the…
The increasing complexity of the aperture geometry of the future space- and ground based-telescopes will limit the performance of the next generation of coronagraphic instruments for high contrast imaging of exoplanets. We propose here a…
The Astro2020 decadal survey recommended an infrared, optical, ultra-violet (IR/O/UV) telescope with a $\sim$6~m inscribed diameter and equipped with a coronagraph instrument to directly image exoEarths in the habitable zone of their host…
This paper describes a concept for the high-accuracy absolute calibration of the instrumental polarization introduced by the primary mirror of a large-aperture telescope. This procedure requires a small aperture with polarization…
We apply a large-scale computational technique, known as topology optimization, to the inverse design of photonic Dirac cones. In particular, we report on a variety of photonic crystal geometries, realizable in simple isotropic dielectric…
An adaptive optics system with a single deformable mirror is being implemented on the THEMIS 90cm solar telescope. This system is designed to operate in the visible and is required to be as robust as possible in order to deliver the best…
Deformable mirrors with very high order correction generally have smaller dynamic range of motion than what is required to correct seeing over large aperture telescopes. As a result, systems will need to have an architecture that employs…
We consider using toroidal curved detectors to improve the performance of imaging optical systems. We demonstrate that some optical systems have an anamorphic field curvature. We consider an unobscured re-imaging three-mirror anastigmat as…
End-to-end optimization, which simultaneously optimizes optics and algorithms, has emerged as a powerful data-driven method for computational imaging system design. This method achieves joint optimization through backpropagation by…
Due to turbulence in the atmosphere images taken from ground-based telescopes become distorted. With adaptive optics (AO) images can be given greater clarity allowing for better observations with existing telescopes and are essential for…
We present methods for optimizing pupil and focal plane optical elements that improve the performance of vortex coronagraphs on telescopes with obstructed or segmented apertures. Phase-only and complex masks are designed for the entrance…
A form of prime focus corrector for the Gregory system is proposed that provides the sub-arcsecond field of view up to 3 degrees in diameter for the spectral range 0.35-0.90 microns. The corrector includes five lenses made of same glass…
Aberration compensation with emphasis on the generalized spherical aberration components is discussed for plane-symmetric and anamorphic optical systems. A narrow field-of-view double-plane symmetric telescope objective containing…
Cherenkov Telescopes are equipped with optical dishes of large diameter -- in general based on segmented mirrors -- with typical angular resolution of a few arc-minutes. To evaluate the mirror's quality specific metrological systems are…
The purpose of this paper is to present the results of a theoretical study pertaining to the feasibility of PIAA units using Deformable Mirrors. We begin by reviewing the general derivation of the design equations driving PIAA. We then show…
A mirrored transformation optics (MTO) approach is presented to overcome the material mismatch in transformation optics. It makes good use of the reflection behavior and introduce a mirrored medium to offset the phase discontinuities. Using…