Related papers: Resilient Stellarator Divertor Characteristics in …
Non-resonant divertors (NRDs) separate the confined plasma from the surrounding plasma facing components (PFCs). The resulting striking field line intersection pattern on these PFCs is insensitive to plasma equilibrium effects. However, a…
In stellarators, achieving effective divertor configurations is challenging due to the three-dimensional nature of the magnetic fields, which often leads to chaotic field lines and fuzzy separatrices. This work presents a novel approach to…
A new type of stellarator divertor is found. It has features of both a nonresonant divertor (A. Punjabi and A. H. Boozer, Phys. Plasmas 27, 012503 (2020)) as well as a resonant divertor. It has the outermost confining surface with sharp…
The design of any large stellarator requires a plan for the removal of the particles and heat that are exhausted across the plasma edge. This is called the divertor problem, for the particle exhaust must be diverted into pumping chambers.…
A new optimized quasihelically symmetric configuration is described that has the desir-able properties of improved energetic particle confinement, reduced turbulent transportby 3D shaping, and non-resonant divertor capabilities. The…
Using a novel optimization procedure it has been shown that the Helically Symmetric eXperiment (HSX) stellarator can be optimized for reduced trapped-electron-mode (TEM) instability [M.J.~Gerard et al., \textit{Nucl.~Fusion} \textbf{63}…
Single Helical Axis (SHAx) states obtained in high current reversed field pinch (RFP) plasmas display, aside from a dominant mode in the m=1 spectrum, also a dominant m=0 mode, with the same toroidal mode number as the m=1 one. The two…
The background magnetic geometry at the edge of a tokamak plasma has to be designed in order to mitigate the particle and energy looses essentially due to turbulent transport. The Divertor-Tokamak-Test (DTT) facility under construction at…
In three-dimensional magnetic configurations for a plasma in which no closed field line or magnetic null exists, no magnetic reconnection can occur, by the strictest definition of reconnection. A finitely long pinch with line-tied boundary…
Simulation studies of a section of a spherically imploding plasma liner, formed by the merger of six hypersonic plasma jets, have been performed at conditions relevant to the Plasma Liner Experiment (PLX) [S. C. Hsu et al., IEEE Trans.…
The formation of the radial electric field, $E_{\rm r}$ in the SOL has been experimentally studied for attached divertor conditions in stellarator W7-X. The main objective of this study is to test the validity in a complex 3D island…
Embedded vortices in turbulent wall-bounded flow over a flat plate, generated by a passive rectangular vane-type vortex generator with variable angle $\beta$ to the incoming flow in a low-Reynolds number flow ($Re=2600$ based on the inlet…
Stellarator power plants require a plan for the removal of the particles and the heat that are exhausted across the plasma edge. Unless a flowing liquid metal can be used to carry the helium exhaust to places where it can be removed from…
The confinement of plasmas in tokamaks and stellarators depends on magnetic field lines lying in nested toroidal surfaces. The transition near the plasma edge away from the lines lying in magnetic surfaces defines properties of divertors.…
Stability of cylindrical interface between two ideal incompressible fluids, including the magnetic field, surface tension and gravitational field is studied in linear approximation. We found that helical waves arising both in plasma comet…
The characteristics of wall recycling with different divertor configurations were investigated in this study, focusing on the observations of the spatial distributions of deuterium atomic emissions in the Balmer series (D_{\alpha},…
One of the first studies of MAST Upgrade divertor configurations with SOLPS5.0 are presented. We focus on understanding main prospects associated with the novel geometry of the Super-X divertor (SXD). This includes a discussion of the…
Boundary layers in turbulent flows require fine grid spacings near the walls which depend on the choice of turbulence model. To satisfy these requirements a semi-structured mesh is generally used in this area with orthogonal and layered…
High-speed stereo PIV-measurements have been performed in a turbulent boundary layer at Re$_{\theta}$ of 9800 in order to elucidate the coherent structures. Snapshot proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD)…
We investigate the connection between the inertial range and the dissipation range statistics of rotating turbulence through detailed simulations of a helical shell model and a multifractal analysis. In particular, by using the latter, we…