Related papers: Microlens-enhanced SiPMs
Recently, the Istituto Nazionale di Astrofisica (INAF) has placed a contract with Hamamatsu Photonics to acquire hundreds of Silicon Photomultipliers (SiPM) tiles to build 10 cameras with 37 tiles each for the ASTRI Mini-Array (MA) project.…
Dark count rate and correlated noise rate are among the main parameters that characterize silicon photomultipliers (SiPM). Typically, these parameters are evaluated by applying approximate formulas, or by fitting specific models, to the…
For a long time, scintillator detectors have suffered from relatively weak spatial resolution due to various influencing factors. Additionally, the high cost of photomultiplier tubes (PMTs) has limited the widespread adoption of…
The light yield of a small undoped cesium iodide (CsI) crystal directly coupled with two silicon photomultipliers (SiPMs) at about 77~Kelvin was measured to be $43.0 \pm 1.1$~photoelectrons (PE) per keV electron-equivalent (keV$_\text{ee}$)…
We present experimental results of characterization of Silicon photomultipliers (SiPM) in a temperature range from 90~mK to 40~K. Two SiPMs, one from ONSEMI and one from Hamamatsu Photonics were tested. Operating voltage ranges, dark count…
The high-luminosity upgrade of the CERN LHC requires the replacement of the CMS tracking detector to cope with the increased radiation fluence while maintaining its excellent performance. An extensive R\&D program, aiming at using 3D pixel…
Silicon Photomultipliers (SiPMs) are a critical technology for the next generation of rare-event search experiments using liquid xenon (LXe). While two VUV-sensitive SiPMs are available, comprehensive in-situ studies are needed to inform…
We optimized micro-holes in a thin slab for fast Si photodetectors at wavelength 800-950nm. Lateral modes are shown to be responsible for the effective light trapping. Small disorder and cone hole shapes helped achieve uniform quantum…
Modern neutrino physics detectors often employ thousands, and sometimes even hundreds of thousands, of Silicon Photomultipliers (SiPMs). The TAO experiment is a notable example that utilizes a spherical scintillator barrel with a diameter…
We compared the performance of a SiPM array and a PMT in a laboratory setting using a single 5.08x5.08-cm cylindrical sodium iodide scintillating crystal. Photomultiplier tubes (PMTs) are the most commonly used device to monitor…
The CMS silicon tracker consists of two tracking devices utilizing semiconductor technology: the inner pixel and the outer strip detectors. They operate in a high-occupancy and high-radiation environment presented by particle collisions in…
In view of the LHC upgrade phases towards the High Luminosity LHC (HL-LHC), the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. Because of its radiation hardness and cost effectiveness, the n-on-p silicon…
Opto-mechanical systems have enabled wide-band optical frequency conversion and multi-channel all-optical radio frequency amplification. Realization of an on-chip silicon communication platform is limited by photodetectors needed to convert…
Challenges in scaling up noble-liquid time projection chambers prompted the exploration of new detection concepts. The liquid hole-multiplier (LHM) was introduced as a potential component, enabling the detection of ionization electrons and…
We advocate support of research aimed at developing alternatives to the photomultiplier tube for photon detection in large astroparticle experiments such as gamma-ray and neutrino astronomy, and direct dark matter detectors. Specifically,…
Visible and near-infrared spectrum photonic integrated circuits are quickly becoming a key technology to address the scaling challenges in quantum information and biosensing. Thus far, integrated photonic platforms in this spectral range…
Silicon is an extremely attractive material platform for integrated optics at telecommunications wavelengths, particularly for integration with CMOS circuits. Developing detectors and electrically pumped lasers at telecom wavelengths are…
High energy physics community is continuously working on development of new photodetectors able to improve their experiments detection performances and so to increase the possibility of new discoveries and new important scientific results.…
As a prototype detector for the SHiP Surrounding Background Tagger (SBT), we constructed a cell (120 cm x 80 cm x 25 cm) made from corten steel that is filled with liquid scintillator (LS) composed of linear alkylbenzene (LAB) and…
We developed a compact and rugged muon detector designed for deployment in boreholes. The detector uses a SiPM-on-tile approach in which silicon photomultipliers are directly coupled to scintillator tiles, thereby eliminating the need for…