Related papers: Focused ion beam polishing based optimization of h…
Focused ion beam (FIB) techniques are employed widely for nanofabrication, and processing of materials and devices. However, ion irradiation often gives rise to severe damage due to atomic displacements that cause defect formation,…
Microstructural analysis with electron backscatter diffraction (EBSD) involves sectioning and polishing to create a flat and preparation-artifact free surface. The quality of EBSD analysis is often dependant on this step, and this motivates…
We perform numerical studies of the effect of sidewall imperfections on the resonant state broadening of the optical microdisk cavities for lasing applications. We demonstrate that even small edge roughness causes a drastic degradation of…
This paper reports on the fabrication and characterization of a high purity monocrystalline diamond detector with buried electrodes realized by the selective damage induced by a focused 6 MeV carbon ion beam scanned over a pattern defined…
Focused ion beam (FIB) technology has been used to fabricate miniature Nb DC SQUIDs which incorporate resistively-shunted microbridge junctions and a central loop with a hole diameter ranging from 1058 nm to 50 nm. The smallest device, with…
We demonstrate a monolithic optical whispering gallery mode resonator fabricated with barium fluoride (BaF$_2$) with an ultra-high quality ($Q$) factor above $10^9$ at $1550$ nm, and measured with both the linewidth and cavity-ring-down…
Several ion source alternatives for current focused ion beam (FIB) systems have been studied to achieve higher brightness, including cold atom ion sources. However, a study of ultracold ions interacting with often used materials is seldom…
Nanoscale fabrication and characterisation techniques critically underpin a vast range of fields, including materials science, nanoelectronics and nanobiotechnology. Focused ion beam (FIB) techniques are particularly appealing due to their…
We present the design, fabrication and characterization of cubic (3C) silicon carbide microdisk resonators with high quality factor modes at visible and near infrared wavelengths (600 - 950 nm). Whispering gallery modes with quality factors…
To date there are extensive studies of optical nonlinearities in whispering gallery resonators (WGRs) in the near and mid-infrared wavelengths. Pushing this research into the visible region is equally valuable. Here, we demonstrate a Kerr…
In this paper we report on the measurement and modelling of enhanced optical refractometric sensors based on whispering-gallery-modes. The devices under test are optical microresonators made of silicon nitride on silicon oxide. In our…
We demonstrate fabrication of a high quality factor lithium niobate double-disk whispering-gallery microcavity using femtosecond laser assisted ion beam milling. Using this method, two vertically stacked 30-um-diameter disks with a…
There are some issues with traditional whispering gallery mode (WGM) resonators like poor light extraction and a dense mode spectrum. In this paper we introduce a solution to these limitations by proposing open WGM (OWGM) resonators that…
Whispering gallery mode (WGM) microcavities can confine photons within a microscale volume for long periods of time, strongly enhancing light-matter interactions, and making it a crucial platform in optical science and applications. Current…
Owing to their ability to confine electromagnetic energy in ultrasmall dielectric volumes, micro-disk, ring and toroid resonators hold interest for both specific applications and fundamental investigations. Generally, contributions from…
Highly reproducible manufacturing of organic optical crystals with well-defined geometry and dimension is important to realize industrially relevant all-organic microelectronic and nanophotonic components, and photonic integrated circuits.…
Miniature concave hollows, made by wet etching silicon through a circular mask, can be used as mirror substrates for building optical micro-cavities on a chip. In this paper we investigate how ICP polishing improves both shape and roughness…
Electron beam lithography is a standard method for fabricating photonic nanostructures around semiconductor quantum dots (QDs), which are crucial for efficient single and indistinguishable photon sources in quantum information processing.…
We report on visible light emission from Si-nanocrystal based optically active microdisk resonators. The room temperature photoluminescence (PL) from single microdisks shows the characteristic modal structure of whispering-gallery modes.…
High refractive index contrast optical microdisk resonators fabricated from silicon-on-insulator wafers are studied using an external silica fiber taper waveguide as a wafer-scale optical probe. Measurements performed in the 1500 nm…