Related papers: Design of Programmable Temperature Platform and it…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
Thin TiO2 films on quartz substrates were prepared by spin coating of undoped and metal-ion-doped Sol Gel precursors. These films were characterised by Scanning Electron Microscopy, Laser Raman Microspectroscopy, Xray Diffraction and UV Vis…
In this work, we demonstrate a new method to produce black TiO2 from pristine anatase TiO2 films. It consists on the immersion of TiO2 films in a hollow cathode H2 RF plasma for a few minutes, resulting in an efficient blackening of TiO2.…
Zinc telluride (ZnTe) thin films have special semiconducting characteristics that make them very promising for a broad range of optoelectronic applications. In this work, a novel approach for synthesizing ZnTe thin films by spin coating…
We report a high-performance thermochromic VO2-based coating prepared by using a three-step process, consisting of magnetron sputter depositions of SiO2 films and V-W films and their postannealing, on standard glass at a low substrate…
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by…
This work reports a pulsed laser-assisted synthesis, detailed structural characterization, and study of plasmonic properties of three sets of TiN/TiNO thin films with high electron density. The first two sets of TiN films were grown at 600C…
A Li-Al-O thin film materials library, deposited by inert magnetron sputtering and post-deposition annealing in O2 atmosphere, was used to study the effects of different annealing temperatures (300 to 850{\deg}C) and durations (1 min to 7…
High quality optical thin film materials form a basis for on-chip photonic micro- and nano-devices, where several photonic elements form an optical circuit. Their realization generally requires the thin film to have a higher refractive…
This paper presents the effect of different cooling rate after annealing on structural and electrical properties of TiO2 thin films. Titanium dioxide thin film was deposited on a silicon substrate using DC magnetron technique. After…
Among the wide bandgap semiconductors, TiO$_{2}$ is the highly stable and cost-efficient semiconductor used for the different photocatalysis processes like water splitting, chemical waste degradation, anti-micro bacterial activities, and…
We report the development of broadband solar absorber coatings based on titanium suboxide composite thin films on aluminium substrates. The films are fabricated via scalable DC magnetron sputtering using a Ti target, followed by…
Titanium dioxide (TiO2) is a key material in optoelectronic and energy conversion technologies, including solar cells and photocatalysis. However, integrating TiO2 into flexible or temperature-sensitive devices requires deposition…
Highly porous Pt/Al thin film electrodes on yttria stabilized zirconia electrolytes were prepared by dealloying of co-sputtered Pt/Al films. The oxygen reduction capability of the resulting electrodes was analyzed in a solid oxide fuel cell…
Sol-gel spin coating technique was employed to synthesize CuO thin films at 1500 rpm, 2200 rpm and 2400 rpm for 30 seconds, and subsequently annealed at 150-550{\deg}C for 1 hour. Multi-layered CuO thin films with 3 and 5 layers were…
Alternating layers of granular Iron (Fe) and Titanium dioxide (TiO$_{2-\delta}$) were deposited on (100) Lanthanum aluminate (LaAlO$_3$) substrates in low oxygen chamber pressure using a controlled pulsed laser ablation deposition…
We report in situ characterized TiO2 thin-films deposited on optical fiber, having thicknesses in the 20-100nm range, and having enhanced conductivity values of 700S/cm upon interacting with hydrogen. This conductivity was achieved in pure…
Thin films of MgB2 superconductor were prepared by three different procedures on sapphire and silicon substrates. Boron thin films, ex-situ annealed in magnesium vapour, resulted in textured polycrystalline films with crystal dimensions…
We fabricated superconducting MgB2 thin films on (001) MgO substrates. The samples were prepared by magnetron rf and dc co-sputtering on heated substrates. They were annealed ex-situ for one hour at temperatures between 450{\deg}C and…
Nanostructured TiO2 thin films were prepared by pulsed laser deposition (PLD) on indium doped tin oxide (ITO) substrates. Results from X-ray photoelectron spectroscopy (XPS) show that Ti 2p core level peaks shift toward the lower binding…