Related papers: A Low-Cost, Low-Power Media Converter Solution for…

The upgraded LHCb detector has started its Run 3 of data taking in 2022, with a completely overhauled DAQ system, reading out and processing the full detector data at every LHC bunch crossing (30 MHz average rate). At the same time, an…

A fast readout system for the upgrade of the COMPASS RICH detector has been developed and successfully used for data taking in 2006 and 2007. The new readout system for the multi-anode PMTs in the central part of the photon detector of the…

Finding tracks downstream of the magnet at the earliest LHCb trigger level is not part of the baseline plan of the upgrade trigger, on account of the significant CPU time required to execute the search. Many long-lived particles, such as…

A front-end readout electronics system has been developed for silicon strip detectors. The system uses an application specific integrated circuit (ASIC) ATHED to realize multi-channel E&T measurement. The slow control of ASIC chips is…

Advances in sensor technology and automation have ushered in an era of data abundance, where the ability to identify and extract relevant information in real time has become increasingly critical. Traditional filtering approaches, which…

The RICH detectors of the LHCb experiment provide identification of hadrons produced in high energy proton-proton collisions in the LHC at CERN over a wide momentum range (2 to 100 GeV/c). Cherenkov light is collected on photon detector…

In this paper we introduce the energy efficiency as a new metric for evaluating both hardware platforms based on Graphic Processor Units (GPU), and algorithm optimisations at High Energy Physics (HEP) experiments. We develop a method to…

The Habitable Worlds Observatory (HWO) -- a flagship ultraviolet/optical/infrared space telescope recommended by the National Academies' Pathways to Discovery in Astronomy and Astrophysics -- will require detector technologies capable of…

Measuring a qubit state is a fundamental yet error-prone operation in quantum computing. These errors can arise from various sources, such as crosstalk, spontaneous state transitions, and excitations caused by the readout pulse. Here, we…

This paper presents the first demonstration of a viable, ultra-fast, radiation-hard machine learning (ML) application on FPGAs, which could be used in future high-energy physics experiments. We present a three-fold contribution, with the…

A new prototype wireless data acquisition system has been developed with the intended application to read-out instrumentation systems having a large number of channels. In addition such system could be deployed in smaller detectors…

In high-energy physics, the increasing luminosity and detector granularity at the Large Hadron Collider are driving the need for more efficient data processing solutions. Machine Learning has emerged as a promising tool for reconstructing…

The upgraded LHCb detector, due to start datataking in 2022, will have to process an average data rate of 4~TB/s in real time. Because LHCb's physics objectives require that the full detector information for every LHC bunch crossing is read…

This paper presents a system consisting of the FPGA IP core, the simple network protocol and the Linux device driver, capable of efficient and reliable data transmission from a low resources FPGA chip to the Linux-based embedded computer…

Power-spectrum analysis is an important tool providing critical information about a signal. The range of applications includes communication-systems to DNA-sequencing. If there is interference present on a transmitted signal, it could be…

For LHC Run 3, the ALICE Time Projection Chamber was upgraded to operate in continuous readout mode. Interaction rates of up to 50 kHz in Pb-Pb collisions require real-time processing of more than 3 TB/s of raw detector data. This…

Micromegas is presently in use by many experiments providing enhanced performance when used in high particle environment. Compared with other solid-state detectors or conventional gas counters Micromegas is robust and radiation hard. Recent…

FPGA-based data processing in datacenters is increasing in popularity due to the demands of modern workloads and the ensuing necessity for specialization in hardware. Driven by this trend, vendors are rapidly adapting reconfigurable devices…

The photon detection system for the LHCb RICH Upgrade consists of an array of multianode photomultiplier tubes (MaPMTs) read out by custom-built modular electronics. The behaviour of the whole chain was studied at CERN using a pulsed laser.…

We present an overview of the 'ICE' hardware and software framework that implements large arrays of interconnected FPGA-based data acquisition, signal processing and networking nodes economically. The system was conceived for application to…