Related papers: Understanding High Coercivity in ThMn12-Type Sm-Zr…
The maximum coercivity that can be achieved for a given hard magnetic alloy is estimated by computing the energy barrier for the nucleation of a reversed domain in an idealized microstructure without any structural defects and without any…
Cobalt carbide nanoparticles were processed using polyol reduction chemistry that offers high product yields in a cost effective single-step process. Particles are shown to be acicular in morphology and typically assembled as clusters with…
Pinning-type magnets maintaining high coercivity, i.e. the ability to sustain magnetization, at high temperature are at the core of thriving clean-energy technologies. Among these, Sm2Co17-based magnets are excellent candidates owing to…
We present the fabrication of metallic magnetic nanowires using a low temperature chemical process. We show that pressed powders and magnetically oriented samples exhibit a very high coercivity (6.5 kOe at 140 K and 4.8 kOe at 300 K). We…
Thin films of the Single Molecule Magnet (Mn12-acetate) have been fabricated on a Si-substrate by the Dip-and-Dry method, a simple and robust technique. Atomic force microscopy and X-ray photoelectron spectroscopy characterizations reveal…
The characteristic microstructure of Sm(Co,Fe,Cu,Zr)$_z$ alloys with SmCo$_5$ cell walls in Sm$_2$Co$_{17}$ cells, all intersected by Zr-rich platelets, makes them some of the best performing high-temperature permanent magnets. Plentiful…
High coercivity, the highest for Cu-free 2 : 17 Sm-Co ribbons, has been obtained in as-spun (= 211 kOe) and short time annealed (= 232 kOe) samples of Sm(CobalFe Zr B)7 5 alloys, with varying B, Zr, and Fe content (= 0-0 06, = 0-0 16, = 0…
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu…
Laser powder bed fusion is a well-established additive manufacturing method that can be used for the production of net-shaped Nd-Fe-B sintered magnets. However, low coercivity has been one of the drawbacks in the laser powder bed fusion…
Permanent magnets draw their properties from a complex interplay of chemical composition and phase, each with their associated intrinsic magnetic properties. Gaining an understanding of these interactions is the key to deciphering the…
Nanostructured permanent magnets are gaining increasing interest and importance for applications such as generators and motors. Thermal management is a key concern since performance of permanent magnets decreases with temperature. We…
Thermal activation tends to destroy the magnetic stability of small magnetic nanoparticles, with crucial implications in ultra-high density recording among other applications. Here we demonstrate that low blocking temperature ferromagnetic…
Low-temperature MnBi (hexagonal NiAs phase) exhibits anomalies in the lattice constants (a, c) and bulk elastic modulus (B) below 100 K, spin reorientation and magnetic susceptibility maximum near 90 K, and, importantly for high-temperature…
Precursor powders of BaMg2-xCoxFe16O27 with (x = 0.0, 1.0, and 2.0) were prepared using high-energy ball milling, and the effects of chemical composition and sintering temperature on the structural and magnetic properties were investigated…
Multiscale simulation is a key research tool for the quest for new permanent magnets. Starting with first principles methods, a sequence of simulation methods can be applied to calculate the maximum possible coercive field and expected…
The magnetization (M) as a function of temperature (T) from 2 to 300 K and in-plane field (H) up to 1 kOe, room temperature easy and hard direction in-plane field hysteresis loops for fields between -100 and +100 Oe, and 10 GHz…
The temperature variation effect of shape anisotropy on the coercivity, HC(T), for the aligned Stoner-Wohlfarth (SW) soft ferromagnets, such as fcc Ni, fcc Co and bcc Fe, are investigated within the framework of Neel-Brown (N-B) analysis.…
Two-dimensional (2D) materials showing room-temperature magnetism and high coercivity are desired for combining magnetism with semiconducting properties useful for spintronics. In this work, the magnetic properties of the 1T phase of…
The coercive field of permanent magnets decays with temperature. At non-zero temperature the system can overcome a finite energy barrier through thermal fluctuations. Using finite element micromagnetic simulations, we quantify this effect,…
Bulk metallic samples were synthesized from different binary powder mixtures consisting of elemental Cu, Co, and Fe using severe plastic deformation. Small particles of the ferromagnetic phase originate in the conductive Cu phase, either by…